Compare

Degafloor QT System and Aggregate - resin flooring - Resin Flooring

Name: Degafloor QT System and Aggregate - resin flooring - Resin Flooring
Brand: Degafloor Ltd
SKU: uyGsDmpqgCzQwBvgyB7CMF

Verified by manufacturer 2 months ago

Degafloor Ltd

Third party certifications:

European Technical Approval (ETA)
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
BBA Agrément Certificate
Certificate type
BREEAM - Certification
Certificate type
HACCP International Product Compliance Certification
Certificate type

The Degafloor Quartz Trowelled (QT) System flooring is a heavy-duty decorative methyl methacrylate (MMA) screed typically laid at 4-6mm and is trowel-applied. Known as MMA resin.

Jump to:

BOS

+44 (0)1778 342545 Website

Application

Suitable for use in dry areas, or where spillages are cleaned away immediately and for areas such as warehousing, distribution facilities, aircraft hangers or corridors. Degafloor works with some of the UK's most well-known commercial supermarket brands providing commercial flooring which will last for years.

To see the Degafloor QT System and Aggregate flooring, check out our case study which shows completed with Aston Villa football club.

A basic guide to resin flooring

Resin flooring is a hardwearing plastic surface, created by mixing a selection of ingredients to initiate a fast and controlled chemical reaction. The chemical reaction creates a highly durable finish, ideal for the heaviest-use environments.

The simplest form of resin flooring, a resin coating consists of:

Formulated synthetic resin
Separate hardener

As demand intensifies– typically resulting in an increase in resin floor thickness – the range of ingredients grows to include aggregates, pigments, decorative chips/flakes and in some cases, cement powder.

Step 1 – Primer

Most resin floors utilise a primer that penetrates into / reacts with the substrate to create a high-strength and reliable bond essential to the floor's longevity.

Step 2 – Bodycoat

The primer is typically followed by a main structural layer, often referred to as the body coat, which creates the bulk of the floor thickness and provides many of the key performance elements such as impact resistance, flexibility and compressive strength, as well as defining the decorative finish of the floor.

Step 3 – Seal coat

Most resin flooring will be finished with 1 to 3 seal coats to encapsulate the body coat and decorative element of the floor and provide the final performance characteristics, such as chemical and wear resistance.

For information, please email: sales@degafloor.com

Description

Longevity and low-maintenance MMA resin

The QT System utilises quartz aggregate with clear resin binders in the body coat, which provides high-performance anti-slip protection and has passed European safety testing. The QT flooring System is renowned for its longevity; its UV-resistant formulation prevents the surface from cracking, deteriorating, or yellowing over time and the surface is simple to clean.

Strength to sustain any terrain

Underneath its light textured finish, the QT System can be adapted to overlay existing flooring, making installation easier across different working environments. This exceptional bond to existing subfloors, along with a chemical bond between layers, creates a truly monolithic floor that provides strength for heavy vehicles, such as fire engines, to move safely across.

Made for multi-layered, dry areas

The Degaﬂoor QT resin system delivers outstanding performance in the heaviest-duty environments and is ideal for commercial and industrial flooring. This trowel-applied flooring system can be tailored to create either a lightly textured or a smooth finish and is ideal for dry areas such as packaging halls, catering facilities, kitchen warehousing, and staff amenity areas where staircases could be used.

Quartz Trowelled with Aggregate System

Similarly to the resin QT System, Quartz Trowelled with Aggregate uses quartz aggregate within clear resin binders within the body coat. In addition to this, the resin QTA System also features a layer of broadcast aggregate over the body coat for ultimate slip resistance and a waterproof resin finish.

A trowel-applied resin system, QTA slip-resistant flooring is also ideal for use on outdoor ramps or when creating falls to drainage in wet or slip-prone areas.

Standard Colour samples (Quartz Trowelled System and with Aggregate System)

Degafloor’s Quartz Trowelled MMA flooring system is available in a wide range of standard colours. The standard mixes listed above are readily available off the shelf, with many other colours also available - please use our sample form to request this directly.

Bespoke Colour samples

Bespoke flooring mixes can be created to match your branding, interior design scheme, or existing flooring. The MMA resin flake options listed on this page are classified as standard colors and are priced at a premium per kilogram, as they are made to order.

Features and benefits:

Installation - fully cured within two hours at temperatures down to -30°C.
Bonds to existing subfloors.
Seamless and impermeable surface without pinholes or air bubbles.
Resistance to physical and chemical attack.
Tailored decorative slip resistant finishes.
Resistant to UV light, weathering and temperatures up to 80°C.
Manufactured in accordance with BS EN ISO 9001:2015 Certificate 20/Q064 Quality Management Systems.
Ideal flooring for commercial and industrial flooring.

General information

Color	Blue Green Grey Red Yellow
Finish	Smooth
Material	Resin Methyl methacrylate Manufacturer guidance Methyl methacrylate resin.
Shape	Formless
Warranty description	Ten year

Uniclass	Ss_30_42_54_75 Resin flooring systemsPrimary
CAWS	M12/110 Resin flooring M12/10 Resin flooring

Specification data - Resin flooring systems

Surface treatment	Finished with a clear seal coat.

Abrasion resistance	Weight loss <3000 mg.
Adhesion strength	≥2.0 N/mm².
Finish	Smooth.
Material	MMA. Guidance for specification option: Methyl methacrylate resin.
Bond strength	≥B2.0.
Capillary absorption	W <0.1 kg/(m²·h^0.5). Guidance for specification option: Capillary absorption and permeability to water.
Carbon dioxide permeability	SD >50 m.
Chemical resistance	Reduction in hardness <50%.
Colour	Autumn Green. Cornflour Blue. Mussel Grey. Ocean Blue. Oyster Grey. Russet Red. Saffron Yellow. Seal Grey. Show more
Cure time	Two hours.
Impact resistance	Class I, ≥IR 4.
Reaction to fire	Not tested.
Release of corrosive substances	SR.
Standard	To BS EN 1504 and BS EN 13813.
Third-party certification	To British Board of Agrément-certified (20/Q064).
Water vapour permeability	Class III.
Wear resistance	≤AR 0.5.
Cleaning options	Guidance for specification option: Cleaning equipment and products for all industrial and commercial floor maintenance. Consult manufacturer and insert requirements or omit: Heavy Duty Wet Vacuum 30 Litre. Heavy Duty Wet Vacuum 60 Litre. Degafloor Eco-Clean. The DegaWash Range. Swift95. The Maxey. Emex. Crusader. Manufacturer guidance Floor Cleaning Solutions. See manufacturer literature 'DegaClean Cleaning & Maintenance Brochure'.