Eponite GP - High Strength Epoxy Mortar
Verified by manufacturer 8 months ago
High strength epoxy mortar.
Application
Used to repair spalled or damaged concrete, chemical bunds, bedding pre-cast concrete beams, nosings on expansion joints, floor repairs, etc. It may also be used as a bedding mortar for paviours and slabs in critical areas where high bond and compressive strengths are required.
Description
A high strength, trowel applied, three component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry. The mixed material is applied to a suitably prepared surface, and cures to form a durable, abrasion resistant repair.
Priming:
Should be primed with Eponite Tackprimer.
Features and benefits:
- Good workability to ensure a high standard finish.
- Impact and abrasion resistant.
- High bond strengths to steel and concrete.
- Unaffected by a wide range of industrial chemicals and acids.
- Frost resistant and impervious to water.
- Cures under damp, cool conditions.
General information
Color | Grey |
Material | Epoxy |
Uniclass | |
CAWS | C42/310 Repair mortar |
Product range |
Specification data - Concrete repair mortars
Mortar type | Epoxy resin-based. |
Pot life | One hour. |
Density | 2015 kg/m³. |
TensileStrength | 12 MPa. |
Adhesive bond | >3.7 MPa (to concrete). |
Application temperature | 5–30°C. |
Thermal co-efficient | 3 x 9ˆ-5 cm/cm/°C. |
Service temperature | 55°C continuous. |
Drying time | Hard dry: 16 hours; full cure: 7 days. |
Literature
Eponite GP