Fastwarm® FastDeck - P5 Chipboard

Fastwarm® FastDeck Panels provide the following:

• Minimal height increases above joisted / suspended subfloors.
• P5 grade 22mm chipboard manufactured with a 100micron foil covering.
• Pre grooved panel for 16mm Pipe installed at 150mm spacings offering optimal outputs into heated rooms.
• Once overboard is laid (Min 6mm flooring grade ply) most floor finishes can be used to finish the floor build up.
• 
  

Fastwarm® FastDeck 22mm chipboard is grooved at 150mm centres to accept 16mm pipe and factory fitted with a 100-micron foil covering for even heat distribution suitable for applications over a suspended / joisted floor providing minimal floor build up.

Fastwarm® 16mm Pert al Pert Pipe can be installed directly into the FastDeck chipboard for the professional finish.

Each FastDeck board is 2400x600x22mm (1.44m2 in coverage)

Example 10m2 / 1.44m2 + 10% wastage = 8 panels

Onsite storage

NOTE: If it is necessary to store the system once you have taken delivery, ensure it is kept in the following conditions:

• A dry, weather tight areaOut of direct sunlight
• Away from sharp objects or chemical spillages
• All chipboard, wood board or plywood must be stacked horizontally and raised off the ground.
• Must not be exposed to moisture or high humidity