Fastwarm® FastGrid Decoupling Membrane For Underfloor Heating
Verified by manufacturer 2 months ago
Fleece backed decoupling membrane for underf
Application
- Decoupling matting for underfloor heating is specifically designed for use with 2 mm Fastwarm cable.
- Suitable for use in wet areas such as ensuites and bathrooms.
- Suitable for floors susceptible to lateral movement and deflection.
Description
Fastwarm® FastGrid is designed to make installations easier, offering a decoupling mat allowing Fastwarms 2 mm loose cable to be evenly spaced out.
Developed by Fastwarm this 4 mm matting is able to accommodate a 2 mm heating element.
Features and benefits:
- Decoupling technology - protects tiled floors and houses 2 mm cable.
- Quick installation times for homeowner or installer.
- Ultra low profile for minimal height impact and less adhesive required.
- Modular installation allows for heat to be applied in only the areas that are required.
- Available in 1 m² sheet and 15 x 1 m roll.
- European compliant and CE marked.
- To be used in conjunction with Fastwarm Loose Cable.
- Fully approved by Ultra Tile Adhesive / Instarmac.
- Waterproof suitable for use in wet areas.
General information
Color | Yellow |
Finish | Film Studded |
Material | Polyethylene Polypropylene Fleece |
Shape | Rectangle Other |
Length | 1000 mm 15000 mm |
Width | 1000 mm |
Height | 4 mm |
Warranty description | Lifetime |
Uniclass | |
CAWS | M40/110 Tiling to M40/5 Tiling to M40/27 Intermediate substrate M40/470 Intermediate substrate T90/478 Underfloor electric heating cables |
Specification data - Plastics sheets
Material | Polypropylene. |
Purpose | Decoupling membrane for underfloor heating. |
Third-party certification | European compliant and CE marked. |
Performance characteristics | |
Tensile strength (minimum) | 65 N/CM. |
Form | Studded. |
Physical properties | |
Colour | Yellow. |
Weight (minimum) | 900 g/m².Manufacturer guidance(+-50). |
Dimensions | |
Thickness (minimum) | 3.8–4.0 mm. |
Width (minimum) | 1 m. |
Roll length (minimum) | 1 m.15 m. |
Surface finish | Polyethylene (PE) film top. Manufacturer guidance0.35 mm. |
Backing | Fleece backing. |
Installation temperature | 5℃ to 40℃. Guidance for specification option: *but limited by tile adhesive specification. |
Melting point | 160℃. |
Air Gap Volume | 2.4 L/m². |
Crack bridging | 0.27 mm. |
Sustainability data
Material | Polyethylene Polypropylene Fleece |
Similar products from Fastwarm Underfloor Heating
Fastwarm® FastCrate