FD10 Swing Door Operator
Verified by manufacturer 2 days ago
Swing door operator.
Application
Suitable for internal doorsets. Its design is both robust and vandal-resistant, making it suitable for any location.
Description
The Gilgen FD10 swing door operator is a suitable solution for the automation of internal door sets, with its sleek design and 60 minute fire rating this versatile operator fits seamlessly into the fabric of the building.
Compact and reliable drive mechanism for use in areas with heavy footfall. This low-noise electromechanical drive unit comes in an impressively sleek package. Its design is both robust and vandal-resistant, making it suitable for any location.
Offers spring force closing and adjustable closing EN 3-7, for different widths of door leaves in accordance with EN 1154.
Fully automatic or low energy operation complete with back check and adjustable hold open, transom mounted with standard rods/sliding rods fitted to door leaf.
Integrated INVERSE function- If required, the FD 10 can be configured to ‘Inverse’, in order for the door to always fail in the OPEN condition. This is especially suitable for smoke ventilation or emergency escapes.
Features and benefits:
- Compatible with single/two-leaf doors and interlock accesses.
- Controlled, spring-actuated closure with motor assistance.
- The drive mechanism has a built-in travel stop Freely selectable.
- Full Power and Low Energy functions in a single drive mechanism.
- Assisted-opening option, with servo function Terminals for connecting accessories such as locks, security/safety elements or operating controls.
- Voltage-free outputs for acknowledgements to, for example, the building management system (via relay PCB).
- Simple to set up and operate via the integrated graphic display screen.
- Software updates via USB interface to ensure a long service life.
- Built-in program selector for changes of operating mode.
- All-pole main switch for safe disconnection from the mains and easy reset by the customer.
- Commissioning with integrated display + joystick.
- Aluminium or stainless steel covering.
- Sliding rods / Standard rods.
- Integrated LCD control panel.
- TÜV approved and complies with the pertinent standards and requirements (e.g. EN 16005, DIN 18650).
- Tested and certified for use on 60 minute fire doors.
General information
Finish | Anodized Polished |
Material | Aluminium Stainless steel |
Shape | Rectangle |
Length | 125 mm |
Width | 730 mm |
Height | 70 mm |
Warranty description | One year |
Uniclass | |
CAWS | L20/55 Doorsets P21/12 Controlled door closers P21/410 Controlled door closers |
Specification data - Controlled door closers
Standard | To EN 16005. |
Classification grades (minimum) | |
Door closer power size | Adjustable 3–7. |
Form | Overhead, face-fixed. |
Closer functions | Controlled closing. |
Materials and finishes | |
Casings | Aluminium.Stainless steel. |
Colour | Manufacturer guidanceAny standard RAL colour. |
Door configuration | Double leaf Guidance for specification option: Door sizes two-leaf 1460–2200 mm. Single leaf Guidance for specification option: Door sizes single-leaf 730–1100 mm. Manufacturer guidanceMaximum door leaf weight of 150 kg. Maximum leaf width 1100 mm. Minimum door width 730 mm. |
Accessories | 4Safe Infra-red safety sensors. Guidance for specification option: 4Safe Infra-red safety sensors mounted on top rails of door leaves back and front to provide maximum safety. Complies with EN 16005. Flat Scan 3G Infra-red safety sensors. Guidance for specification option: Flat Scan 3G Infra-red safety sensors mounted on top rails of door leaves back and front to provide maximum safety. Complies with EN 16005. Finger protection. Guidance for specification option: Provision should also be made to protect against the potential hazards caused at the hinge or pivot stile – a suitable finger protection must be fitted to comply with EN 16005 and the Machinery Directive 2006/42/EC. Maglock. Electric strike. |
Power transfer | Standard rods (pushing function). |
Ingress protection | IP20. |
Operating voltage | 230 V.a.c (+10/-15 %), 50 Hz, 10/13 A. Manufacturer guidancePower consumption of drive system max. 350 W. Rated motor capacity 100 W. Stand-by consumption 4 W. Power supply, external user 24 V d.c. (±10 %), 1.4 A. |
Speed | Opening/ closing speed: 40°/s. |
Torque | Output shaft torque permanent maximum: 56 Nm, short maximum: 165 Nm. |
Activation | Access control system. Activation sensor. Stainless Steel Push Plate - engraved "Push to Open". |
Sustainability data
Material | Aluminium Stainless steel |
Literature
FD10 Swing Door Operator