NBS Source
I'm a manufacturer

Application

Automatic swing door operator suitable for lightweight internal and heavyweight external doors with high wind loads and heavy footfall. Its design is vandal-resistant, making it suitable for any location.

Description

An electro-mechanical swing door operator which provides quiet and smooth door operation. Suitable for internal and external doors in a wide variety of applications such as retail, hotel, office, airports, stations, hospitals, schools and industrial and commercial premises.


The Gilgen unit for swing doors is capable of reliably opening and closing doors even if exposed to wind speeds of up to 80 km/h (320 Pa). For external doors, Gilgen Door Systems recommends to assume a wind pressure of at least 100 Pa 45 km/h.

Fully automatic or low energy operation complete with back check and adjustable hold open, transom mounted with standard rods/ sliding rods fitted to door leaf.

 

Integrated INVERSE function- If required, the FD 20 can be configured to ‘Inverse’, in order for the door to always fail in the OPEN condition. This is especially suitable for smoke ventilation or emergency escapes.


Features and benefits:

  • Compatible with single/two-leaf doors and interlock accesses.
  • The integrated load function can withstand winds of up to 80 km/h Controlled, spring-actuated closure with motor assistance.
  • The drive mechanism has a built-in travel stop.
  • Test-approved “inverse” power-down opening function to let smoke escape and act as an emergency exit.
  • Freely selectable Full Power and Low Energy functions in a single drive mechanism.
  • Terminals for connecting accessories such as locks, security/safety elements or operating controls.
  • Voltage-free outputs for acknowledgements to, for example, the building management system (via relay PCB).
  • Software updates via USB interface to ensure a long service life.
  • Built-in program selector for changes of operating mode.
  • Straightforward setup/installation with closing-force adjustment screw.
  • All-pole main switch for safe disconnection from the mains and easy reset by the customer.
  • Commissioning with integrated display + joystick.
  • Aluminium or stainless steel covering.
  • Sliding rods / Standard rods.
  • TÜV approved and complies with the pertinent standards and requirements (e.g. EN 16005, DIN 18650).
  • Tested and certified for use on 60 minute fire doors.

General information

Color

Beige

Black

Blue

Bronze

Brown

Show more

Finish

Anodized

Polished

Powder-coated

Material

Aluminium

Stainless steel

Shape

Rectangle

Length

120 mm

Width

690 mm

Height

95 mm

Warranty description

Two year

Uniclass

Pr_30_36_59_15 Controlled door closersPrimary

CAWS

L20/55 Doorsets

P21/12 Controlled door closers

P21/410 Controlled door closers

Specification data - Controlled door closers

Standard

To EN 16005, DIN 18650.

Classification grades (minimum)

-

Door closer power size

Adjustable 3–7.

Form

Overhead, face-fixed.

Closer functions

Controlled closing.

Materials and finishes

-

Casings

Aluminium.

Stainless steel.

Colour

-

Manufacturer guidance

Any standard RAL colour.

Door configuration

Double leaf

Guidance for specification option:

Door sizes two-leaf 1500 – 3200 mm.

Single leaf

Guidance for specification option:

Door sizes single-leaf 750 – 1600 mm.

Manufacturer guidance

Maximum door leaf weight of 250 kg.

Maximum leaf width 1600 mm. Minimum door width 720 mm.

Accessories

4Safe Infra-red safety sensors.

Guidance for specification option:

4Safe Infra-red safety sensors mounted on top rails of door leaves back and front to provide maximum safety. Complies with EN 16005.

Flat Scan 3G Infra-red safety sensors.

Guidance for specification option:

Flat Scan 3G Infra-red safety sensors mounted on top rails of door leaves back and front to provide maximum safety. Complies with EN 16005.

Finger protection.

Guidance for specification option:

Provision should also be made to protect against the potential hazards caused at the hinge or pivot stile – a suitable finger protection must be fitted to comply with EN 16005 and the Machinery Directive 2006/42/EC.

Maglock.

Electric strike.

Show more

Power transfer

Standard rods (pushing function).
Sliding rods (pushing and pulling function.

Ingress protection

IP40 (42).

Operating voltage

230 V.a.c (+10/-15 %), 50 Hz, 10/13 A.

Manufacturer guidance

Power consumption of drive system max. 560 W.

Rated motor capacity 100 W.

Stand-by consumption 4 W.

Power supply, external user 24 VDC (±10 %), 2 A.

Speed

Opening/ closing speed: 40°/s.

Torque

Output shaft torque permanent maximum: 80 Nm, short maximum: 240 Nm.

Activation

Access control system.

Activation sensor.

Stainless Steel Push Plate - engraved "Push to Open".

Sustainability data

Material

Aluminium

Stainless steel

Literature

Gilgen FD 20 Swing Door Brochure

Gilgen FD 20 Swing Door Brochure

Similar products from Gilgen Door Systems UK Ltd

FD10 Swing Door Operator

FD10 Swing Door Operator

FD20-UG  Swing Door Operator

FD20-UG Swing Door Operator