NBS Source
I'm a manufacturer

FV065 Small Ventilated Cavity Barrier Roll

Verified by manufacturer 7 months ago

illbruck – a brand of Tremco CPG UK Ltd

Fire rated product designed to be used as a cavity barrier up to 65 mm uninsulated cavity within external walls. Encapsulated in a polythene barrier & made from a flexible intumescent material.

Jump to:
+44 (0)1942 251400 Website

Application

Used as cavity fire barrier to the compartmentation lines in an uninsulated cavity behind external walls consisting of natural stone masonry, brickwork or blockwork outer substrates and a framed and sheathed backing wall such as Timber Frame.


FV065 Roll is also suitable for use around window and door openings, even where differential movement is factor and where a friction or compression fit alternatives may not be entirely desirable due to the possibility of deformation of a full fill NVFB during settlement.

Description

FV065 Roll is specially designed and made from a flexible material, allowing it to be packed and applied as intumescent material on a easy to use roll.


With a thickness of only 6 mm, the low profile design offers significant space and labour saving over traditional cavity socks, whilst also ensuring the external uninsulated cavity is left unobstructed and free to ventilate. It is also covered with a protective layer of polythene for ease of handling and to protect it from water.


FV065 intumescent material will expand to close the external wall cavity, providing effective fire resistance, for integrity and insulation for 60 minutes* depending upon the construction of the external wall cavity.


FV065 is designed to close off a total cavity of 65 mm which allows for building tolerances of up to 15 mm (above the typical maximum cavity ventilation requirements of 50 mm).

General information

Color

White

Finish

Other

Guidance for specification option:

Sleeved.

Material

Intumescent

Polyethylene

Manufacturer guidance

Flexible intumescent compounds, sleeved in a polyethylene wrapper and bound into a roll.

Shape

Other

Guidance for specification option:

Continuous roll.

Length

6300 mm

Width

75 mm

Height

6 mm

Warranty description

Other

Guidance for specification option:

Any product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge.

Uniclass

Pr_25_80_80_43 Intumescent sheet cavity barriersPrimary
Pr_25_80_80_79 Sleeved mineral wool cavity barriers

CAWS

P10/77 Ventilated cavity barriers

P10/435 Ventilated cavity barriers

Specification data - Intumescent sheet cavity barriers

Standard

Tested and certified in accordance with ASFP Technical Guidance Document TDG19.

Guidance for specification option:

Tested and certified in accordance with ASFP Technical Guidance Document TDG19 at least 60 minutes integrity and 60 minutes insulation up to 65 mm wide cavities.

Properties

Ventilated.

Width

25 mm.

Fire performance

Fire-rated for up to 60 minutes.

Guidance for specification option:

Depending on the application. Consult manufacturer and insert requirements.

Composition

Flexible intumescent compounds, sleeved in a polyethylene wrapper and bound into a roll.

Length

6300 mm.

Height

75 mm.

Thickness

6 mm.

Bond

Stainless steel screws.

Guidance for specification option:

  • Stainless steel screws must be used.
  • The diameter of the screw head should be a minimum of 5 mm and a maximum width of 11.5 mm, the length of the screw should be a minimum of 50 mm.
  • Gas actutaed or pnumatic nailing tools may be used, however the actuation pressure should be carefully controlled to ensure that the stainless steel nail does not push through the fire barrier.
  • The nail head diameter must be a minimum 5 mm and maximum 11.5 mm, the nail should be a minimum of 50 mm long.

Colour

White.

Expansion

30:1 ratio.

Manufacturer guidance

Free expansion.

Durability

Type X.

Guidance for specification option:

Intended for use in conditions exposed to weather (UV, rain and frost).

Operating temperature

80°C.

Manufacturer guidance

Maximum continuous operating temperature.

Service temperature

-20°C to + 70°C.

Storage

Store in dry, ambient conditions between -20°C to + 70°C.

Life expectancy

≥60 years

Guidance for specification option:

At least 60 years (refers to the active intumescent component).

Shelf life - unlimited when stored as recommended.

Installation accessories

Drill.
Drill bit and driver or nailing tool.
Appropriate self-tapping screws/fasteners.
Tape measure.
Levelling device.
Cutting shears.

Manufacturer guidance

Consult manufacturer for guidance.

Execution

Guidance for specification option:

In strict accordance with the manufacturers Technical Data Sheet, Test Data and separately available detailed NBS Product Specification. The principal designer must approve the use of any cavity barrier, whether open-state or full-fill, in conjunction with the products fire classification reports, taking full account of the whole construction of the external wall systems and the components, including any requirements of the Building Regulations and Warranty provider standards.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom