Height Restrictors Swing

The AUTOPA Swing Height Restrictor:

• The AUTOPA Swing Height Restrictor has a standard clearance of 2.05mwith a knock bar, 2.2m without a knock bar, limiting access to high sided vehicles and is perfect for use on commercial and industrial sites.
• The beam of the Swing Height Restrictor can be opened to allow full access when needed and can be locked in the open position if necessary using a second catch post.
• Manufactured from galvanized mild steel, the body of the height restrictor is coated red as standard (other colours are available upon request; please state BS/RAL numbers at time of order).
• The Swing Height Restrictor is available ragged or flanged and can be fitted with a knocking bar and/or a maximum height warning sign upon request.
• Main Body: 90 x 90 mm square tube.
• Main Gate Arm: 60mm x 60mm square tube.
• Knocking bar: 48 mm diameter tube.
• Standard clearance: 2.05 m with a knock bar, 2.2m without a knock bar.
• 3 mm wall thickness.
• 600 mm below ground (ragged only).

The AUTOPA Double Swing Height Restrictor:

• The AUTOPA Double Swing Height Restrictor has a standard clearance of 2.05m with a knock bar, 2.2m without a knock bar, limiting access to high sided vehicles.
• Ideal for use on commercial sites such as retail parks, it spans two carriageways, preventing vehicles from circumventing the access control measures in place.
• The beams of the height restrictor can be opened when required to allow full access, and locked in the open position if needed using additional catch posts.
• Manufactured from galvanized mild steel, the body of the height restrictor is coated red as standard (other colours are available upon request; please state BS/RAL numbers at time of order).
• Available ragged or flanged, the Double Swing Height Restrictor can be fitted with a knocking bar and/or a maximum height warning sign upon request.
• Knocking bar: 48mm diameter tube.
• Standard clearance: 2.05m with a knock bar, 2.2m without a knock bar.
• 600 mm below ground (ragged only).

Installation:

• Flanged Height Restrictors require bolting down to a suitable concrete surface (not less than 600 mm³) by means of four M16 bolts per leg.
• Ragged Height Restrictors require an excavated hole of at least 600 mm³ for casting into concrete per leg.
• It is recommended that suitable signs are installed to ensure vehicles are aware of the obstruction.