Compare

Hydroswell BentoStrip - Hydrophilic Waterstop

Name: Hydroswell BentoStrip - Hydrophilic Waterstop
Brand: SMR PROJECTS LIMITED
SKU: pPy6aFR2sFtB9zxrVkhd7M

Verified by manufacturer 3 months ago

SMR PROJECTS LIMITED

Third party certifications:

BBA Agrément Certificate
Certificate type

Butyl rubber and bentonite clay based hydrophilic waterstop.

Jump to:

+44(0)1295 279747 Website

Application

Developed for the sealing of construction joints in reinforced concrete construction.
Can also be applied as a system component for Hydroswell BentoGuard Membrane. It seals against perched water as well as hydrostatic head.
To ensure a continuous “gasket” of the Hydroswell water bar joints should have a lateral (side by side) overlap of 100 mm with the ends pressed firmly together.
A minimum concrete coverage of 70 mm on any exposed side is required.
BentoStrip 2.0 can be applied both vertically and horizontally, but under no circumstances should it be used in expansion joints.

Description

Hydroswell BentoStrip 2.0 is a high-quality butyl rubber and sodium bentonite hydrophilic water bar for the sealing of construction joints in concrete.

BentoStrip 2.0 has high resistance to a wide range of chemicals. Final confirmation about compatibility under specific conditions can be obtained from the manufacturers technical department.

Due to shrinkage of the drying concrete small voids can appear in construction and cold joints, through which water can penetrate. In contact with water, Hydroswell BentoStrip 2.0 swells to seal these voids in the joint.

Features and benefits:

Hydroswell BentoStrip 2.0 is a permanently active system, which swells up to more than 400% of its original dry volume.
User-friendly system: simple and quick to install by means of gun nailing, with BentoSteel 2.0 fixing mesh, tie wiring or gluing to metal surfaces.
The use of Hydroswell BentoSteel 2.0 helps the installation and will protect the BentoStrip 2.0 against damage during pouring or compaction of the concrete.
Able to resist hydrostatic pressures of up to 60 m of water column = 6 bar.
The durability and performance of the Hydroswell BentoStrip 2.0 will exceed the design life of the structure (bentonite is a natural product).
The highly elastic and plastic properties of will easily counterbalance the initial concrete shrinkage of the structure.
Will not dissolve in water and is non-polluting.

General information

Color	Green
Material	Butyl Clay Guidance for specification option: Sodium bentonite.
Shape	Other
Length	5000 mm
Width	20 mm
Height	25 mm

Uniclass	Pr_35_90_15_74 Rubber hydrophilic waterstopsPrimary
CAWS	E40/320 Hydrophilic waterstops D40/565 Proprietary waterstops

Specification data - Rubber hydrophilic waterstops

Certification	British Board of Agrément (BBA) Certificate.
Cross section	20 x 25 mm.

Expansion	Volume expansion in concrete water: 150%. Volume expansion in rain water: 400%.
Density	1.43 g/cm³.
Swelling capability	Swelling pressure when encapsulated: 1.8 N/mm².
Resistance	Resistance to hydrostatic pressure: 6 bar. Guidance for specification option: Tested to 4 bar.
BendRadius	50 mm. Guidance for specification option: At corners.
Accessories	Not required. Hydroswell BentoSteel. Guidance for specification option: Metal wire mesh for the fixation of Hydroswell BentoStrip 2.0. Expanded metal grid made of galvanized U-shaped steel and is nailed in place. Developed for the fixation of Hydroswell BentoStrip 2.0 in all concrete construction joints.