K Rend Silicone Spray Dash

K Rend Silicone Spray Dash is a water repellent, cement based and polymer modified self-coloured render system, incorporating silicone technology, which is designed to receive a selection of dry dash and wet dash (roughcast) finishes.

System includes:

A range of polymer modified basecoats for use as a backing for K Rend Silicone Spray Dash finish.

- Basecoats:

K Rend HP12 Base:

A “high polymer” basecoat for enhanced performance on difficult substrates. It is used over dense concrete or brickwork (with the use of R7 Acrylic Primer) as a primary coat for K Rend finishes. K Rend HP12 Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend HPX Base:

A “high polymer” basecoat for ultra high performance onto unusual substrates which require greater flexibility and adhesion. It is used over lightweight blockwork (with alkali resistant reinforcing mesh incorporated) or brickwork (with the use of R7 Acrylic Primer) as a primary coat for K Rend finishes. K Rend HPX Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend Standard UF Base:

A high quality, general purpose sprayable basecoat with excellent workability. It is used over 7 Newton, medium density concrete block as a primary coat for K Rend finishes. K Rend Standard UF Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend UF Fibre Base:

A high quality, general purpose sprayable basecoat with excellent workability and increased impact resistance and tensile strength. It is used over 7 Newton, medium density concrete block as a primary coat for K Rend finishes. K Rend UF Fibre Base is Kitemarked to BS EN 998-1.

- Final coat:

K Rend Silicone Spray Dash:

A water repellent, self coloured dash receiver for machine application. It is applied over K Rend basecoats and is designed to receive a selection of dry dash and wet dash (roughcast) finishes. Silicone Dash is Kitemarked to BB EN 998-1.