Licata Therm Graphite EPS External Wall Insulation (EWI) system - External Wall Insulation System
Verified by manufacturer 15 days ago
BBA Agrément Certificate
Certificate type
Low lambda, grey EPS with a choice of render, acrylic brick slips and clay brick slips, finishes and colours.
Application
Suitable for new builds and refurbishment for brick/block work.
Description
The Licatatherm Graphite EWI system benefits from being breathable, weather resistant and protection against algae and mould. With increased strength and crack resistance, due to the glass fibre mesh. Choose from brick slips, coloured render or resin multi-colour for the decorative finish. EWI systems help improve the appearance and thermal efficiency of properties, reducing overall energy consumption.
Features and benefits:
- Suitable for various substrates.
- Over 700 colour options.
- Weather resistant.
- Energy carbon saving.
- Breathable.
- Protects against algae and mould.
- Fully fire compliant.
Durability:
- This system has an assessed anticipated lifespan in excess of thirty years.
Design considerations:
- Should the proposed project incorporate any unique design elements or curved elevations, please contact the manufacturer for recommendations or assistance.
INSTALLATION:
Installer:
The system manufacturer, or a contractor approved by the system manufacturer. Installation shall be made strictly in accordance with Licata Building Systems Ltd instructions. Reference should be made to the project specification, method statement, drawings and all other relevant literature. Consult with LBS Ltd for latest literature and technical bulletins.
FINISHES:
Primer:
Apply the Isolante LG Primer with a roller or brush to the dry base coat in an even pattern. Where possible always use the colour Primer to match the specified Topcoat finish. Allow to dry for a minimum of 12 hours.
Licata Silicone Render:
Thin coat is a ready mixed top coat for external use, highly breathable, high water resistance and excellent mechanical strength. Silicone render provides a high resistance to algae, fungi, mould and to atmospheric agents.
The careful choice of acrylic binders and silicone, ensures good durability and a gloss finish with pearlescent effect to the water drops.
Licata Silicone Render is suitable as a decorative finish in all work requiring high permeability to water vapour.
Siloxan Color:
A coating made with water-dispersed siloxane binder paste, ready for use and which can be pigmented. Siloxan Color is specifically designed for work on new or existing facades, as well as for the decorative phase of reinforced skim coating, and in LicataTherm external solid insulation. Owing to its formula, Siloxan Color provides complete protection for the facade against rain and atmospheric agents. The special additives contained in the formula guarantees excellent protection against algal and mould growth.
Brick slips:
The brick slip systems can be used across a range of different applications and substrates. Suitable for internal and external application on both new build or refurbishment projects. The brick slip systems are durable and weather-resistant, with a ten-year guarantee if installed by a Licata approved applicator. A choice of acrylic or clay brick slips are available.
- Acrylic Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic Brickslips are a suitable finish for external wall insulation systems used on new build or renovation of old buildings. It can also be used with timber-metal frame or modular where speed and weight are important in designs but traditional brick slips would not be recommended.
- Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application.
General information
Color | Clear Beige Black Blue Brown Manufacturer guidanceRender colour Finishes are available in over 700 colours and shades and also most RAL and NCS colours. |
Finish | Smooth Textured Manufacturer guidanceAvailable in a choice of grain sizes from 0.7mm - 2.0mm to give a stippled effect, smooth finishes also available. |
Material | Silicone Silicate Clay Brick Acrylic |
Shape | Rectangle |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year 25 year Manufacturer guidanceIf installed by an approved Licata installer, both 10 and 25 year material warranties are available depending on the project requirements and detailing. 25-year warranties can be under written to meet the requirements of EWI energy saving grants. Licata provides guarantees for material defects on all Licata approved systems that are installed by their accredited contractors. These guarantees are valid for the initial ten years of the system's life and in addition they can also offer 25 years' extended warranties for projects supported by government schemes, extended warranties are available through third-party insurance partners such as SWIGA, subject to terms and conditions. For more details on these guarantees, please contact the manufacturer. |
Uniclass | |
CAWS | M21/20 External wall insulation system . . . . . . M21/210 External wall insulation system |
Product range |
Specification data - External wall insulation systems
System performance | Thermal performance. |
Preparation | Approved proprietary biocidal wash. Surfaces must be sound, free from loose material and clean.Guidance for specification option: Where an adhesive system is used, the surfaces must be sound, free from loose material and clean. Where additional mechanical fixings are to be used, the substrate must be capable of sustaining the design loads. Existing substrates that show visible signs of algae and mold will require treating with an approved proprietary biocidal wash prior to any render works. |
Support rails and brackets | |
Fixing method | |
Material | To solid substrate. |
Bracket fixings | N/A. |
Boards | |
Material | Not required.Guidance for specification option: For brick and blockwork substrates. A1 Fibre cement board.Guidance for specification option: For steel and timber framed substrates. |
Fixings | Adhesive and mechanical.Self-drilling screws.Manufacturer guidanceAll fixings are based upon Etag and BBA certification and the manufacturers products are designed and tested to fully comply with current required certifications and testing. |
Insulation | |
Material | Grey expanded polystyrene (EPS) boards.Guidance for specification option: Greutherm White and Grey Expanded Polystyrene (EPS 70 and EPS 100) Insulation Boards, 1200 x 600 mm in a range of thicknesses from 40–200 mm, with a nominal density of 15 to 26 kg·m³, compressive strength of 70 kN·m² and 100 kN·m², and a minimum tensile strength of 150 kPa. Boards are manufactured to comply with BS EN 13163: 2012 and classified as Euroclass E in accordance with BS EN 13501-1: 2007. |
Adhesive | Raso Top 800 Grey.Guidance for specification option: Cement-based powder requiring the addition of 5.25 litres of clean water per 25 kg bag. Raso Top 800 White.Guidance for specification option: Cement-based elastic-fibre-reinforced powder requiring the addition of 6 litres of clean water per 25 kg bag. |
Additional mechanical fixings | Dakota PP-La.Guidance for specification option: Polypropylene with Polyamide PA6 pins. Fischer Termoz 8 U.Guidance for specification option: Polyamide PA6 with stainless steel or electro-galvanized pins. Fischer Termoz 8 UZ.Guidance for specification option: Polypropylene with Polyamide PA6 pins. Fischer Termoz WS 8 L.Guidance for specification option: Polyamide PA6 with stainless steel or electro-galvanized pins. Fischer Termoz 8 NZ.Guidance for specification option: Polypropylene with Polyamide PA6 or electro-galvanized pins. Ejot EjoTherm SDM-T.Guidance for specification option: Polyamide PA6 with stainless steel or electro-galvanized pins. Ejot EjoTherm NT U.Guidance for specification option: Polyethylene, PE-HD with stainless steel or electro-galvanized pins. Ejot EjoTherm NK U.Guidance for specification option: Polyethylene, PE-HD with stainless steel or electro-galvanized pins. Ejot EjoTherm NTK U.Guidance for specification option: Polypropylene with Polyamide PA6 GF 50 pins. Ejot EjoTherm SDK U.Guidance for specification option: Polyethylene, PE-HD with stainless steel or electro-galvanized pins. Ejot EjoTherm STR U.Guidance for specification option: Polyethylene, PE-HD with stainless steel or electro-galvanized pins. Manufacturer guidanceDesigned and tested to meet the current wind load and suction requirements, the system is adhesively fixed with supplementary fixings in accordance with BS EN 1991-1-4:2005. Special consideration should be given to locations with high wind-load pressure coefficients, as additional fixings may be necessary. It is recommended that a load factor of 1.5 is used to determine the ultimate wind load, in accordance with BS EN 1990:2002. |
Fire barriers and stops | |
Material | 1000 x 200 mm rock fibre panels.Fire breaks. |
Fixings | Adhesively fixed. |
Beads and trims | Licata PVC stop beads.Licata meshed corner beads. |
Movement joints | |
Form with | Render beads |
Sealant | Compression band. |
Accessories | Backing strips.Joint filler. |
Render carrier or reinforcement | |
Material | LicataTherm Rete 150, glass fibre mesh.Guidance for specification option: 1 m-wide mesh (4 x 5 mm) of multi-strength glassfibre with a polymer coating and nominal weight of 150 g/m². LicataTherm Ret01-1160, glass fibre mesh.Guidance for specification option: 1 m-wide mesh (3.5 x 4.5 mm) of multi-strength glassfibre with a polymer coating and nominal weight of 145 g/m². |
Mesh size | As Material. |
Fixings | Adhesively fixed. |
Render | |
Application | Primer coat. |
Material | Primer Islolante LG.Guidance for specification option: Ready to use pigmented universal primer, based on acrylic copolymers AcrilPrimer — primer, based on acrylic copolymers. Diluted with water in ratio 1:1 up to 1:3 (primer : water). Aggrappante LG Primer. |
Decorative finish | Siloxan Color finishing coat.Guidance for specification option: Ready to use paste, silicone-based finishing coat. Applied to a thickness of 1.5 or 2 mm. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements. LicataSil finishing coat.Guidance for specification option: Ready to use paste, silicate-based finishing coat. Applied to a thickness of 1.5 or 2 mm. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements. Acrylic brick slips.Guidance for specification option: Acrylic Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic Brickslips are a suitable finish for external wall insulation systems avaible in 3 mm size. Clay brick slips.Guidance for specification option: Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application., Avaible in 10mm, 15mm, 20mm sizes; insert requirements. Resin multi-colour.Guidance for specification option: Multi Colour – Wall Coating in putty, ready to use, with an acrylic binder base and grains of coloured ceramic, high water repellency and excellent abrasion resistance. |
Colour | Guidance for specification option: Consult manufacturer and insert requirements.
|
System accessories | Licata movement beads.APU with mesh 9 mm.Compression band. |
System completion | Inspection of completed installation. |
Samples required | Submit samples of Licata Topcoat finishes for approval. Keep approved samples on-site for the duration of the contract for inspection/ comparison purposes. Designated items: Licata Topcoat Finishes. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Italy Guidance for specification option: Render materials excluding insulation boards. |
Country of product manufacture | Italy Guidance for specification option: Render Materials excluding insulation - Italy. Insulation boards UK & Germany. Manufacturer guidanceRender Materials excluding insulation - Italy. Insulation boards UK & Germany. |
Material | Silicone Silicate Clay Brick Acrylic |
Recyclability | 100% Guidance for specification option: Insulation materials. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 100 % |
Third party certifications
Literature
LicataTherm Graphite EWI Render System
LicataTherm Graphite EWI Brick Slips System
Licata Render Systems Brochure
1. Licatatherm Brochure 2022
Licata Acrylic Brick Slips Brochure
Licata Clay Brick Slips Brochure