NBS Source
I'm a manufacturer
Compare variants

M1 - 1 Zone Detection Cable (Standard and High Sensitivity) - Water Sensing Cable

Verified by manufacturer 3 months ago

Standard

Andel Ltd Variant:

One zone water leak detection cable that provides a solution for highly sensitive applications.

Jump to:
+44 (0)1484 845000 Website

Application

Suitable for highly sensitive applications, including:

  • Below raised floors.
  • Above suspended ceilings.
  • Run in drip trays.
  • Laid around the base of plant, apparatus or tank.
  • Laid in loops or wave pattern for general monitoring of larger areas.
  • Attached to pipework outside lagging.

Description

The One Zone water leak detection cable has a distinctive construction, with two cores twisted around a central former, covered with a mesh outer braid. The cable provides a solution for highly sensitive applications, particularly for being cable tied directly to the underside of pipework.


The start and end points of the cable are provided by either traditional Floodline junction boxes or the Plug and Play system. The sensor can be wetted and dried any number of times provided the cable is not contaminated with a substance that permanently changes its electrical characteristics. If the contamination is soluble then the cable can be removed, washed (clean water only), dried and returned to use subject to the level of contamination.


Features and benefits:

  • Distinctive construction with a tough nylon outer braid.
  • The High Sensitivity cable has a polyester fabric wrap under the outer braid.
  • Variable lengths available typically between 5–15 metres.
  • Activates with any conductive liquid anywhere along the entire length of the detection cable.
  • Can be wetted and dried multiple times.
  • Quick and easy installation.
  • Suitable for highly sensitive applications.


Standards:

  • CPR (Construction Products Regulation) Testing.
  • Under the harmonised European standard EN 50575 this cable has been tested for heat release, smoke production and flame spread in accordance with EN 60332-1-2:2004+A11:2016.
  • Tested under AVCP (Assessment and Verification of Constancy of Performance) system 3 by a notified body the cable was classified as Euroclass Eca.

General information

Color

White

Material

Nylon

Shape

Other

Length

5000 mm

15000 mm

Bespoke

Width

5 mm

Warranty description

Ten year

Uniclass

Pr_75_50_48_96 Water-sensing cablesPrimary

Specification data - Water-sensing cables

Liquid to be detected

Water.

Resettability

Required.

Guidance for specification option:

If the contamination is soluble then the cable can be removed, washed (clean water only), dried and returned to use subject to the level of contamination.

Cable length

To suit the application.

Guidance for specification option:

Available between 5 and 15 m lengths. Insert requirement.

Construction

Two core - HFLSF core insulation and nylon outer braid.

Diameter

5 mm.

Fixing

Standard 5 mm tower clips, self-adhesive clips or tie- wraps.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Nylon

Literature

M1 Standard - 1 Zone Detection Cable

M1 Standard - 1 Zone Detection Cable

M2 High Sensitivity - 1 Zone Detection Cable

M2 High Sensitivity - 1 Zone Detection Cable

Similar products from Andel Ltd

Leader Cable - Water Sensing Cable

Leader Cable - Water Sensing Cable

Multi 8 Zone Detection Cable (Standard and High Sensitivity) - Water Sensing Cable

Multi 8 Zone Detection Cable (Standard and High Sensitivity) - Water Sensing Cable

Ranger 2 Cable (Standard and High Sensitivity) - Water Sensing Cable

Ranger 2 Cable (Standard and High Sensitivity) - Water Sensing Cable