NBS Source
I'm a manufacturer

MB 2K Flexible Tanking Slurry - Multi-functional Waterproof Coating

Verified by manufacturer 21 days ago

Remmers UK Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Multi-functional waterproof coating.

Jump to:
+44 (0) 333 034 8126 Website

Application

Flexible tanking slurry suitable for a range of uses, including:

  • Rapid waterproofing.
  • Waterproofing in new buildings.
  • Horizontal waterproofing in and underneath walls.
  • WTA-compliant retroactive waterproofing.
  • Can be applied >3 m below ground.
  • Approved for connecting to water impermeable concrete structures.
  • Waterproofing of foundations and base points.
  • Waterproofing in a bond.
  • Bonding layer on old bitumen coatings.
  • Repair of flat roof waterproofing on roofs of structures which are not habitations.
  • For attaching perimeter insulation panels.

Description

Multi-functional waterproof coating, for application as a grout or slurry.


Features and benefits:

  • Tested on crack formation of greater than 3 mm (according to DIN EN 14891).
  • Complete drying and cross-linking occur rapidly, after just 18 hours.
  • Meets the test requirements for PMBC.
  • Radon-tight (verified through testing).
  • Solvent-free.
  • Bitumen-free.
  • Water pressure tight.
  • High tensile adhesion strength.
  • Good adhesion on non-mineral substrates (e.g. plastics, metals).
  • Three times as dimensionally stable as required.
  • Highly flexible, elastic and crack-bridging.
  • Can be covered after a very short time (≥ 4 hours).
  • UV-resistant.
  • Freeze/ thaw-resistant.
  • Can be plastered and painted over.
  • Can be applied as a grout, with a brush or trowel, or by spraying.
  • CE marked to EN 14891: 2012.


Consult manufacturer's literature for substrate preparation guidelines.

General information

Color

Grey

Finish

Smooth

Material

Polymer

Cement

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_20_31_53_66 Polymer-modified cementitious slurriesPrimary

CAWS

M40/110 Tiling to

J10/110 Proprietary mortar

E60/325 Grouting

C41/390 Grouting joints

Specification data - Polymer-modified cementitious slurries

Third-party product certification

Declaration of Performance (DoP).
BCCA Technical Approval (ATG).

Composition

Polymer binder, cement, additives, special fillers.

Application rate

1.1 kg/m²/mm.

Crack bridging

To DIN EN 14891, ≥3 mm (with a dry layer ≥3 mm thick).

Water vapour diffusion resistance

μ = 1755.

WaterImpermeability

Tested up to an 8 m water column.

Reaction to fire

To DIN EN 13501-1, Class E.

Drying time

At 5 °C, 90% RH: Approximately 18 hours for a 2 mm layer.
At 23 °C, 50% RH: Approximately 9 hours for a 2 mm layer.

Compacted bulk density

1.0 kg/dm³.

Tensile strength

≥0.5 N/mm².

Colour

Grey.

Sustainability data

Country of product manufacture

Germany

Material

Polymer

Cement

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate

BBA Agrément Certificate

BBA Agrément Certificate

BBA

Literature

MB 2K Technical Datasheet

MB 2K Technical Datasheet

MB 2K Brochure

MB 2K Brochure

MB 2K Technical Inspection Report

MB 2K Technical Inspection Report

Remmers Podium Deck Waterproofing Technical Drawing

Remmers Podium Deck Waterproofing Technical Drawing