Verified by manufacturer 4 months ago
The Newton Cavity Drain Membrane (CDM) System is a maintainable basement waterproofing solution, certified to BES 6001 by BRE Global, ideal for new-build basements and refurbishment projects.
This product is suitable for the use of Basement waterproofing system.
Cavity Drain Membranes and Drainage
Cavity drain membrane (CDM) systems are a maintainable, internal basement waterproofing solution, suitable for protecting below-ground environments against water that has penetrated through the structure. CDM Systems are known as ‘Type C’ waterproofing in British Standard 8102:2022 and are ideal for new-build, refurbishment and historic/listed projects.
Known as the most failsafe form of waterproofing, the cavity drain membranes capture ingressing water at the point of ingress, and then the CDM drainage system manages and directs the water to an integral pumping system or drainage outlet for safe removal.
The Newton PAC-500 System also provides a combined CDM waterproofing and gas proofing system for below-ground spaces that are at risk from ground gases.
Pumps and Control Systems
Once the water has been captured by the cavity drain membranes and drainage channels, it needs to be safely removed. The Titan-Pro is a packaged sump chamber and pump system designed specifically to be used with the Newton CDM System. Compatible with a variety of Newton pumps, it is ideal for almost any cavity drain waterproofing system.
Cavity Drain System Ancillary Products
The Newton CDM System requires a number of specialist ancillary products that are critical for correct installation. At Newton, we supply the full range of ancillary items that are used in conjunction with our cavity drain membranes, drainage and pumping systems.
Color | Other Manufacturer guidanceNewton 503 - White, Newton 503 Mesh - White, Newton 508 - White, Newton 508 Mesh - White, Newton 520 eco Floor - Black, Newton Condensation Strip - Black, Newton 906 Lime Inhibitor - White, Newton WaterSeal Tape (A5) - Black, Newton WaterSeal Tape (A5W) - White, MultiPlug - Blue/Orange and Blue/Blue, Nuseal Plug - Red and White, Newton Overtape - Black, Newton Mesh Tape - White, Newton Basedrain and Floordrain - White, Fibran XPS 500-C - Green, Newton 809-DPC – Black. |
Finish | Smooth |
Material | Other Guidance for specification option: Dependent on variant specified |
Shape | Other Guidance for specification option: Dependent on variant specified |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane |
Product range |
Third-party certification | BBA Certificate No: 94/3013. |
Filter layer | Manufacturer guidancePlease refer to the relevant data sheet for this information. |
Stud height | Newton 503 and 503 Mesh – 3 mm deep square studs, Newton 508 and 508 Mesh – 8 mm deep conical studs, Newton 520 eco Floor – 20 mm deep conical studs. |
Sheet thickness | Newton 503 and 503 Mesh – 3 mm, Newton 508 and 508 Mesh – 8 mm, Newton 520 eco Floor – 20 mm. |
Weight (minimum) | 23 kg.24.6 kg. |
Colour | Consult literature for details and insert requirements. |
Performance characteristics | |
UV resistance | Keep fully isolated from UV light. |
Recycled content | 100%. |
Membrane | CDM 503 Membrane (M5). CDM 503 Mesh Membrane (M11). CDM 508 Membrane (M1). CDM 508 eco Floor (M2). CDM 508 Mesh Membrane (M3). |
Joint seal | Newton WaterSeal Tape (A5). Guidance for specification option: Black. Newton WaterSeal Tape (A5W). Guidance for specification option: White. Contractor's choice. |
Fixings | Newton MultiPlug (A1). Newton NuSeal Plugs (A2). Newton NuSeal Plugs (A3). |
Above slab | Not required. Newton Baseboard. Guidance for specification option: Insert drawing reference number. Manufacturer guidanceDrainage without floor membranes. |
Below slab | Not required. Newton Basedrain Access Port D5. Newton Basedrain Adaptor D24. Newton Basedrain Corner D6 – Drainage Conduit. Newton Basedrain T Piece D7. Manufacturer guidanceDrainage with floor membranes. |
System | Titan-Pro (TPW). |
Pump | Newton Titan NP150. Newton NP400. Newton NP400W. Newton NP750. Newton NP750W. |
Accessories | Not required. Newton 906 Lime Inhibitor. |
Studded layer | Manufacturer guidancePlease refer to the relevant data sheet for this information. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Material | Other Guidance for specification option: Dependent on variant specified |
Recyclability | 100 Guidance for specification option: Newton 503 and Newton 508 can both be recycled via the Newton Membrane Recycling Service, turning the offcuts of membrane into small chips that are then processed by a third party to be manufactured into new construction products |