NBS Source
I'm a manufacturer

Palace Wear-Top Floor Levelling Compound - Wearing Screed

Verified by manufacturer 2 months ago

Palace Chemicals Ltd Third party certifications:
  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

An internal / external underlayment and wear resistant topping.

Jump to:
+44 (0)151 486 6101 Website

Application

Wear-Top is recommended for application over a broad range of sound and durable floor internal and external surfaces. This includes tamped or worn concrete, pre-existing sand/cement floor screed underlayment, as well as non-porous power-floated concrete and similarly dense impermeable surfaces.

Description

Wear-Top is a dual-purpose internal/external high durability floor screed which can be applied as a subfloor, self-smoothing underlayment or as a wear-resistant surface topping. Its high early strength development makes it a suitable base for receiving decorative wear resistant resin coatings.


Wear-Top will ensure a final smooth finish, which can be further enhanced by the application of a resin-based resilient floor covering, especially where a consistent colour finish is needed throughout.


Features and benefits:

  • Takes foot traffic after three hours and vehicle loading after 36 hours.
  • Can be laid from 5 mm up to 20 mm bed depth in a single pour.
  • Suitable for pump or trowel application.
  • Can receive a decorative resin-based coating after 48 hours.

General information

Color

Grey

Finish

Smooth

Material

Cementitious

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Lifetime

Uniclass

Pr_35_31_06_71 Ready-mixed levelling and wearing screedsPrimary

CAWS

M10/19 Proprietary screeds to BS EN 13813

M10/195 Proprietary screeds to BS EN 13813

Product range

Palace Range

Specification data - Ready-mixed levelling and wearing screeds

Standard

To BS EN 13813:2002.

Binder type

Cementitious.

Compressive strength

C35.

Flexural strength

F10.

Wear resistance

AR0.5.

Working time

20–30 minutes at 20°C.

Setting time

Initial set: 60 minutes; Foot traffic: 180 minutes.

Curing time

4 hours for a 5 mm layer.

Mix

4.0 L of water per 20 kg bag.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Cementitious

Third party certifications

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

Occupational Health & Safety Management System ISO 45001

ISO 9001 Quality Management

ISO 9001 Quality Management

Quality Management System Certificate - ISO 9001

Literature

Tile Adhesive & Flooring Range

Tile Adhesive & Flooring Range

Safety-data-sheet-of-68-50-WEAR-TOP

Safety-data-sheet-of-68-50-WEAR-TOP

Wear-Top-TDS-210323

Wear-Top-TDS-210323