NBS Source
I'm a manufacturer

Premcrete Eponite PS - High Strength Polyester Resin Mortar

Verified by manufacturer 7 months ago

Premcrete

High-strength polyester resin mortar.

Jump to:
+44 (0) 23 80276166 Website

Application

EPONITE PS should be applied to the substrate using a suitable trowel, it is important to ensure that a good bond is achieved between the mortar and the primer, good compaction of the mortar is important. The mortar is applied at thicknesses between 5 and 50 mm, taking care to ensure that the mortar is not further edge. The trowel should be kept clean, using PREMCRETE CLEANING SOLVENT to prevent the mortar sticking to the trowel. This will ensure that a clean sharp finish is achieved.

Description

EPONITE PS is a two-component polyester resin mortar. The product consists of two packs of base resin component and two packs of catalysed filler.

The mixed mortar possesses exceptionally rapid strength gains and will achieve an excess of 25 MPa after one hour. Hardened mortar possesses exceptionally high mechanical properties and chemical resistant.

General information

Color

Brown

Grey

Finish

Epoxy

Material

Polyester

Guidance for specification option:

Two-component.

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_20_31_53_26 Epoxy mortarsPrimary

CAWS

R12/446 Sealing for concrete manholes – mortar

Product range

Mortars

Specification data - Epoxy mortars

Density

2300 kg/m³.

TensileStrength

9 MPa (three hours).

Elastic modulus

>15 GPa.

Adhesion to concrete

>2 MPa.

Skid resistance

Class 1.

Capillary absorption

<0.5 kg/m²/hr^0.5.

Pot life

20 minutes.

CompressiveStrength

15 kN/mm² (modulus).

Literature

Eponite PS TDS

Eponite PS TDS