Verified by manufacturer 7 months ago
Hydrophilic rubber waterstop.
HYDROSTOP WS10 should be applied to the substrate using HYDROSTOP WSM as an adhesive. Apply a 10 mm bead to the concrete and press the waterstop firmly into the HYDROSTOP WSM ensuring complete contact with the adhesive. HYDROSTOP WS10 should be nailed at 300 mm centres using HYDROSTOP RETAINING PINS.
Adjacent strips of HYDROSTOP WS10 should be parallel lapped by 100 mm to ensure a complete seal is achieved. Internal and external corners should be formed by cutting the HYDROSTOP WS10 and butt jointing. Do not bend the HYDROSTOP WS10 around corners, as this will affect the integrity of the seal achieved.
HYDROSTOP WS10 is swellable hydrophilic waterstop which will swell upon contact with water. When installed into a confined joint the expansion of the waterstop exerts a positive pressure against both faces of the concrete to achieve a watertight seal which is resistant to hydraulic pressure.
HYDROSTOP WS10 will swell up to 200% which makes it particularly suitable for sealing smaller sections of concrete. The installed waterstop has a delayed initial swell which prevents premature swell.
Color | Grey |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | 25 year |
Uniclass | |
CAWS | E40/320 Hydrophilic waterstops |
Product range |
Dimensions | 5 x 20 mm.Guidance for specification option: 15 m roll length. |
Swelling capability | 200%. |
TensileStrength | 1.45 MPa. |
Density | 1205 kg/m³. |
Hardness (shore A) | 45. |
Elongation at break | 200%. |
Service temperature | -30 to +60°C. |