RubberBond FleeceBack EPDM
Verified by manufacturer 17 days ago
RubberBond FleeceBack EPDM, fully adhered waterproofing membrane, for use on low sloped roofs with limited access.
Application
For use on low sloped roofs with limited access.
Description
A BBA approved RubberBond FleeceBacked EPDM (Ethylene-Propylene Diene Monomer) waterproof membrane. A non-reinforced EPDM joined with a patented hot melt adhesive technology to a thick polyester fleece. Designed for fully adhered installations on warm or cold roof constructions. The system is available with a range of accessories, including Semi Cured Pressure Sensitive Tapes, Uncured Pressure Sensitive tapes, pipe seals, roof drains, moulded walkway pads and a range of roof edge products. Installation is carried out by trained independent Approved Local Contractors. The membrane is available in a slate grey finish.
General information
Color | Grey |
Material | EPDM |
Shape | Rectangle |
Length | 12200 mm 15250 mm |
Width | 1500 mm 3050 mm |
Uniclass | |
CAWS | J42/10 Warm deck roof covering J42/110 Warm deck roof covering J42/120 Inverted roof covering J42/130 Cold deck roof covering J42/400 Waterproof membrane |
Product range |
Specification data - Polymeric membranes
Classification data | |
Material | Ethylene propylene diene monomer (EPDM). |
Third-party certification | British Board of Agrément (BBA) Certificate. |
Thickness (minimum) | 2.54 mm. |
Colour | Black/ Grey. |
Accessories | 75mm Pressure sensitive secure tape. Guidance for specification option: For overlap seaming of sheets, alternatively use membrane with FAT. 150mm Pressure Sensitive Cover Strip. Guidance for specification option: Semi cured for butt joints of membrane and seaming to edge trims & adjoining materials. 225mm Pressure Sensitive Uncured tape. Guidance for specification option: For all detailing work. Pressure Sensitive Pipe seal. Guidance for specification option: To fit pipes 13–75 mm. Pressure Sensitive Pipe seal. Guidance for specification option: To fit pipes 13–75 mm. Pressure Sensitive Walkway pad. Guidance for specification option: Walkway Pad is designed to protect the membrane and give a non slip walkway in those areas exposed to repetitive foot traffic. HP-250 Primer. Guidance for specification option: To be used in conjunction with all Pressure Sensitive goods. Decking Adhesive. Guidance for specification option: Water Based Acrylic Adhesive (WBA) or Polyurethane Adhesive PU. Bonding Adhesive. Guidance for specification option: For adhering membrane at angle changes and upstands. Water Cut Off Mastic. Guidance for specification option: Used as a sealing agent between various membranes and applicable when membrane is being terminated using a compression type seal. Termination bars. Guidance for specification option: For mechanical termination to perimeter and upstands, used with Water Cut Off Mastic. HP Fasteners. Guidance for specification option: For mechanical fixing of insulation board, to be used with insulation plates 55mm - 175mm. Insulation Plates. Guidance for specification option: For fastening of insulation to be used with HP fasteners 75mm x 75mm. Angle roof drain. Guidance for specification option: Outlet opening 90 mm x 90 mm. Anti Back Up Drain. Guidance for specification option: 68mm. Top Drain. Guidance for specification option: 110mm outlet. Drip trim. Guidance for specification option: Refer to manufacturer for range of depths. Edge trim 75/ 150. Guidance for specification option: Refer to manufacturer for full colour range. Wall trim. Guidance for specification option: 25 x 100 x 3000 mm. RB Fasteners. Guidance for specification option: Available in 35 mm & 45mm for perimeter edge trim fastening. Paving Support discs. Guidance for specification option: used for patio roofs to support paving slabs & decking above the membrane surface. |
Roll size | 1.5 x 12.2 m. Guidance for specification option: With Factory Applied Tape (FAT). Optional (FAT) for faster seaming of membrane on site. 3.05 x 15.25 m. 3.05 m x 15.25 m. Guidance for specification option: With Factory Applied Tape (FAT). Optional (FAT) for faster seaming of membrane on site. |
Tensile strength (MPa) | 11.3 MPa. Guidance for specification option: Control. 11.6 MPa. Guidance for specification option: Heat aged. |
Elongation to break | 450%. Guidance for specification option: Control. 280%. Guidance for specification option: Heat aged. Manufacturer guidanceTo BS 903-A2. |
Water vapour permeability | 0.3 g/m²/day. Manufacturer guidanceTo BS 3177. |