NBS Source
I'm a manufacturer

Application

Suitable:

  • For bedding seams, mouldings, rails, window and door frames and many other types of covered joints in portable buildings.
  • For sealing some seam or lap joints in metal constructions.


Not suitable for use in joints that may trap or harbour standing water.

Not recommended for use on surfaces which can be affected by white spirit e.g. bitumen.

Description

Non-setting bedding sealant for metal joints.


Features and benefits:

  • High performance bedding sealant with a solvent release curing system.
  • Does not form a skin but leaves a dry surface which remains pliable after curing.
  • Good adhesion to a wide variety of surfaces, especially coated metals.
  • Good weather resistant properties.
  • Good application characteristics either with hand applied or air operated guns.
  • High performance in low movement joints.
  • Easy to tool and clean off using Hodgson’s Caravan Sealant Cleaner - consult manufacturer for details.
  • Base technology: Synthetic rubber polymer.
  • Good mould resistance.
  • Slump: Nil (up to 20 x 10 mm vertical channel).
  • Non-staining.



General information

Color

Black

Cream

Grey

White

Material

Rubber

Guidance for specification option:

Synthetic rubber polymer.

Uniclass

Pr_30_31_76_09 Butyl rubber construction joint sealantsPrimary

CAWS

L10/810 Sealant joints

L20/80 Sealant joints

L20/820 Sealant joints

N10/460 Sealant

N10/760 Sealant bedding and pointing

N10/80 Sealant

Product range

Mastics

Specification data - Butyl rubber construction joint sealants

Third party certification

-

Manufacturer guidance

Seamseal CV is a non-drying bedding sealant as described in the National Caravan Council Joint Sealing Manual.

Sealant type

Mastic.

Colour

Black.

Guidance for specification option:

Available subject to minimum order quantities.

Cream.

Grey.

Guidance for specification option:

Available subject to minimum order quantities.

White.

Adhesion

Good (to wood, brick, concrete, glass and many metal surfaces including painted aluminium and steel).

Cure time

Curing system: Solvent evaporation. Full cure normally occurs in 2-4 days. Rate of cure will depend on thickness, ambient temperature, joint size and design.

Movement

±5% (accommodation).

Shrinkage

8% (approximately).

Specific gravity

1.6 g/cm³.

UV resistance

Good.

VOC content

Volatile content: 6-8%; Volatile organic content: 70.9 g/L.

Application temperature range

+5 to +30°C.

Service temperature range

-20 to +80°C.

Similar products from Hodgson Sealants

Bevamastic

Bevamastic

Seamseal BR

Seamseal BR