Compare

SEDM-L - EIS MA Multi-Compartment Smoke Control Damper (≤1200x2030mm) - Smoke Damper

Name: SEDM-L - EIS MA Multi-Compartment Smoke Control Damper (≤1200x2030mm) - Smoke Damper
Brand: Mandik UK Limited
SKU: q2aqPCzzLSyxmbBo2QrZRX

Verified by manufacturer 15 days ago

Design .44 - With actuating mechanism BEN, BEE, BE for 230 V

Mandik UK Limited

Third party certifications:

Hygiene requirements to VDI 6022
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
Certificate of constancy of performance
Certificate type
DoP
Certificate type
EPD
Certificate type

Multi-compartment smoke control damper.

Jump to:

0117 4526376 Website

Application

Dampers are designed for using in fire compartments that can be connected to the smoke exhaust ducts (tested according to BS EN 1366-8 or 9) or they can be installed in or on the construction of the fire compartment. The damper can be installed into:

Horizontal or vertical smoke extraction ducts.
Designed for installation with horizontal blade axis.
Gypsum plasterboard wall construction with a minimum thickness of 100 mm (wall or shaft wall).
Solid wall construction with a minimum thickness of 100 mm (wall or shaft wall).
In shaft wall British gypsum with a minimum thickness of 107 mm (wall or shaft wall).

Additional applications may be available, please reference product Technical Specifications for more detail.

Description

Smoke control dampers SEDM-L are designed into an inlet or extract smoke ventilation system. The dampers are designed either to close to provide compartmentation or to open (for fresh air inlet) or to allow removal of the heat and combustible products from a fire in the affected fire zone/ compartment.

The damper blade is controlled by electrical actuating mechanism. Dampers are fire resistant and are intended for systems with manual or automatic activation.

Features and benefits:

Multi-blade fire damper from 200 x 430 mm to 1200 x 2030 mm.
CE certified to BS EN 12101-8.
Construction length only 250 mm.
Tested in accordance with BS EN 1366-10.
Classified to BS EN 13501-4.
Damper actuating by electrical actuator.

General information

Color	White
Material	Mineral fibre Calcium silicate
Shape	Square Rectangle
Length	250 mm
Width	200 mm 250 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 700 mm 750 mm 800 mm 850 mm 900 mm 950 mm 1000 mm 1050 mm 1100 mm 1150 mm 1200 mm Show more
Height	430 mm 630 mm 830 mm 1030 mm 1230 mm 1430 mm 1630 mm 1830 mm 2030 mm Show more

Uniclass	Pr_65_65_24_80 Smoke dampersPrimary
CAWS	U90/445 Dampers, smoke

Specification data - Smoke dampers

Standard	To BS EN 12101-8.
Classification	-
Standard	To BS EN 13501-4.
Multi-compartment	-
Integrity class	EI 90. EI 120. Manufacturer guidance Refer to the manufacturer's literature for placement and installation details to achieve the required fire resistance values.
High operational temperature	HOT 400/30.
Suitability	Ve duct. Ve wall. Manufacturer guidance Refer to the manufacturer's literature for details.
Smoke leakage	S.
Under pressures	1000.
Inside or outside	(i ↔ o).
Smoke control use	C modulating.
Aerodynamic performance	To BS EN 1751. Guidance for specification option: Damper blade tightness: Class 3 (minimum). Damper casing tightness: Class C.
Activation	MA – manual. AA – automatic.
Actuators	Belimo BEN, BEE, BE for 230 V.

Dimensions	- Manufacturer guidance Consult manufacturer's literature for performance details and insert requirements. Dampers from 200 x 430 mm to 1200 x 2030 mm. Length: 250 mm.
Control module	Not required. Communication and control module MDCM. Guidance for specification option: The MDCM damper control module is connected on a bi directional communication loop back to a control panel, typically located at the FCC. Communication and control module MDPM. Guidance for specification option: The MDPM damper control module is a combined control module and damper positioning module to provide a balanced/3R position.
Flanges	Not required. Flange over blades. Flange over damper. Flange and cover grille KMM over blades. Flange and cover grille KMM over damper. Manufacturer guidance The surface of the grille is provided with powder coating, standard colour is RAL 9010. Requirements for other colour must be discussed in advance with the manufacturer.