ShieldTEC Warm Roof Hotmelt Waterproofing System
Verified by manufacturer over a year ago
BBA Agrément Certificate
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
Fully bonded bitumen based hot melt waterproofing membrane system for warm roofs.
Application
ShieldTEC provides a tough, flexible, non- tracking, self-sealing waterproof membrane for use on inverted, warm, cold, hybrid, blue and living flat roofs and podium areas. ShieldTEC is also suitable for use as a damp-proof membrane in solid concrete floors or as the waterproofing layer above or below ground in concrete, brick or blockwork structures.
Description
A specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system. ShieldTEC Warm Roof Hotmelt system achieves a Broof (T4) reaction to fire without the need for additional fire resistant coverings allowing for a light weight fire resistant system.
Components:
- ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
- ShieldTEC PS2 - A vapour control membrane with a nominal mass of 2 kg/m².
- Suitable Shield insulation.
- ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
- ShieldTEC PS2 - VCL, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root resistant protection membrane.
Features and benefits:
- Hot applied system.
- Broof (T4) without additional coverings
- Suitable for completely flat (zero falls) decks.
- BBA Certified No. 20/5793
- Outstanding durability – lasts the life of the building.
- Tough and resistant to impact damage.
- High bond strength to substrate and insulation
- High tensile strength.
- Monolithic application.
- Rapid setting
- Resistant to rain, snow and frost immediately after application.
- Fully bonded system – Non-tracking.
General information
Color | Grey Guidance for specification option: Charcoal grey. |
Finish | Slate chippings |
Material | Bitumen |
Warranty description | 25 year Guidance for specification option: Up to |
Uniclass | |
CAWS | J41/110 Built-up reinforced bitumen membrane warm deck roof covering |
Specification data - Reinforced bitumen membrane warm roof covering systems
Preparation | |
Horizontal work | ShieldPRIME. |
Skirtings and vertical work | ShieldPRIME. |
Air and vapour control layer | |
Type | ShieldTEC PS2.Guidance for specification option: 2 kg/m². |
Insulation | |
Type | ShieldBOARD PIR.ShieldWOOL.ShieldGLASS. |
Waterproof covering | |
First layer | |
Type | ShieldTEC Monolithic Hot Melt.Guidance for specification option: A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives. |
Top layer | |
Type | ShieldTEC PS2.Guidance for specification option: VCL, 2 kg/m². ShieldTEC PS4.Guidance for specification option: Underlay, 4 kg/m². ShieldTEC PS5 .Guidance for specification option: Mineral cap sheet, 5 kg/m². ShieldROOT M.Guidance for specification option: Root resistant protection membrane. |
Sustainability data
Country of product manufacture | United Kingdom |
Recyclability | 100% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 10 % Guidance for specification option: Up to. |
Third party certifications
Third party certifications
BBA Agrément Certificate
20/5793 ShieldTEC Warm Roof Hotmelt System
ISO 14001 Environmental Management Systems
ISO 14001 Environmental Management System
ISO 9001 Quality Management
ISO 9001 Quality Management System
Similar products from Shield Membranes Ltd
ULTRAShield High Performance Felt Membrane System