SPEEDLINE Shaft Encasement Systems Utilising Knauf Board
Verified by manufacturer 2 months ago
SE60-K-56
SE60-K-56
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
A high-performance fire protection system to enclose lift shafts and service rises.
Application
Sectors:
- High rise residential.
- Education.
- Healthcare.
- Leisure.
- Student accommodation.
- Offices.
Description
A high performance fire protection system to enclose lift shafts and service rises.
The Speedline Shaft Encasement System allows installation to take place from the landing side only.
This system is non-load-bearing and designed to fit between structural floors.
Features and benefits:
- Fast and simple to erect.
- Cost effective.
- Good impact resistance and stiffness.
- Lighter in weight than masonry.
- High level of fire protection.
- Allows any thickness of coreboard to be used.
Structural performance:
- Strength grade to BS 5234-2:1992 Annexes A-F.
Fire performance:
- Fire resistance to BS 476:1987:Part 22.
Acoustic performance:
- Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.
Installing framing for partitions:
- Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.
General information
Length | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | K10/30 Metal stud K10/125 Metal stud partition system |
Product range |
Specification data - Gypsum board partition systems
Framing | Speedline 'I' Stud, 60 mm. |
Linings | |
Inner layers | Knauf Coreboard, 19 mm.Guidance for specification option: Secured in-between Speedline 'I' stud. |
Outer layers | Knauf Fire Panel, 15 mm. |
Fasteners | Speedline Drywall Screws. |
Joint treatment | Speedline Drywall Fibreglass Tape.Speedline Ready Mix Joint Compound.Speedline Putty Pads.Speedline Corner Bead Tape. |
System accessories | Speedline Fire Rated Acoustic Sealant.Speedline PB24 Partition Brace.Speedline FS24 Flat Bracing Strip.Speedline Service Support Plate.Speedline Putty Pads. |
Fire resistance | To BS 476-22:1987, 60/ 60 minutes from shaft side (Integrity/ Insulation). |
Partition height | Guidance for specification option: Insert requirement, maximum 3800 mm. Maximum based on 600 mm centres and calculated based on a limiting deflection of L/240 at 200 Pascals. |
Calculated weighted sound reduction index (Rw) | 39 Rw dB. Guidance for specification option: Based on the optimum system thickness. |
Centres | 600 mm. |
StrengthGrade | Heavy duty. |
Head/ Floor channel | Speedline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Speedline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Speedline Deep Track. Guidance for specification option: Used for partition heights between 4m and 8m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Speedline Extra Deep Track. Guidance for specification option: Used for partition heights between 8m and 10.2 m. Can be used as a head track where a deflection head of up to 45mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange. |
Sustainability data
Third party certifications
Third party certifications
BSI Kitemark
BIM Level 2 Kitemark - For Design and Construction Phase
BSI Kitemark
BSI Kitemark™ for BIM Objects
EPD
Environmental Product Declaration EPD - Drylining
ISO 9001 Quality Management
ISO 9001:2015 Quality Management System
UK Conformity Assessed (UKCA)
UKCA Declarations of Performance - Drylining
Literature
SPEEDLINE Partitioning Systems
SPEEDLINE Fixings and Finishing Solutions
Product Data Sheet - Drylining