Compare

SPEEDLINE Twin Frame I Stud Partition Systems Utilising Knauf Board

Name: SPEEDLINE Twin Frame I Stud Partition Systems Utilising Knauf Board
Brand: Metsec (voestalpine Metsec)
SKU: pr9sWgfGi5AaKw3kwtJCqN

Verified by manufacturer 3 months ago

TWI50-K-59(2x50+100)(250)

Metsec (voestalpine Metsec)

Third party certifications:

BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type

Plasterboard partition system

Jump to:

+44 (0) 121 601 6000 Website

Application

Wall partitions.

Description

Lightweight, quick to construct, cost-effective, compact and able to achieve high levels of fire resistance and sound insulation. The non-load bearing high performance walls, constructed from plasterboard facings on metal studs, offer considerable advantages over traditional heavy masonry construction.

Features and benefits:

Acoustics up to 70 Rw dB with Ctr of -10.
Suitable for use with Code for Sustainable Homes or BREEAM.
Suitable for party wall construction with requirements of +3 to +8 dB DnT,w on ADE requirements of 45 DnT,w + Ctr.
Fire resistance up to 120 mins BS 476:Part 22.
Structural columns can be incorporated within the partition cavity due to unbraced twin frame design.

Structural performance:

Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length	Bespoke
Width	200 mm 210 mm 250 mm 260 mm 270 mm 300 mm 350 mm 370 mm 450 mm Show more
Height	Bespoke

Uniclass	Ss_25_10_30_35 Gypsum board partition systemsPrimary
CAWS	K10/30 Metal stud K10/125 Metal stud partition system

Product range	Drylining / Twin Frame Partitions - Unbraced I Stud Drylining / SPEEDLINE Drywall Systems

Specification data - Gypsum board partition systems

Framing	Twin Speedline 'I' Stud, 50 mm.
Insulation	Acoustic partition roll, 50+50+100 mm.
Linings	-
Inner layers	Knauf Soundshield Plus, 12.5 mm.
Outer layers	Knauf Soundshield Plus, 12.5 mm.
Fasteners	Speedline Drywall Screws.
Joint treatment	Speedline Drywall Fibreglass Tape. Speedline Ready Mix Joint Compound. Speedline Corner Bead Tape.
System accessories	Speedline Fire Rated Acoustic Sealant. Speedline PB24 Partition Brace. Speedline FS24 Flat Bracing Strip. Speedline Service Support Plate. Speedline Putty Pads.

Fire resistance	To BS 476:1987:Part 22, 60/ 60 minutes (Integrity/ Insulation).
Partition height	Guidance for specification option: Insert requirement based on centres specified. 600 mm centres: maximum 2700 mm. 400 mm centres: maximum 3300 mm. Calculated based on a limiting deflection of L/240 at 200 Pascals.
Nominal thickness	250 mm. Guidance for specification option: Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.
Calculated weighted sound reduction index (Rw)	70 (-2;-8) Rw dB. Guidance for specification option: Based on the nominal system thickness.
Centres	600 mm. Guidance for specification option: Standard. 400 mm.
StrengthGrade	Severe duty.
Head/ Floor channel	Speedline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Speedline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Speedline Deep Track. Guidance for specification option: Used for partition heights between 4m and 8m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Speedline Extra Deep Track. Guidance for specification option: Used for partition heights between 8m and 10.2 m. Can be used as a head track where a deflection head of up to 45mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange.
Standards	To BS 5234-2:1992 Annexes A-F, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010.