NBS Source
I'm a manufacturer

Styccobond F73 Plus - Flooring Adhesive

Verified by manufacturer 5 months ago

Ball, F and Co Ltd Third party certifications:
  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Heavy duty one part flooring adhesive.

Jump to:
+44 (0)1538 361633 Website

Application

Suitable for securing needle punched/ fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.

It can also be applied to Stopgap smoothing underlayment's, sound, smooth subfloors of concrete, granolithic, sand/ cement screeds and plywood.

Description

A single pack, fibre-reinforced moisture curing heavy duty flooring adhesive.

It is water-resistant and suitable for outdoor use, however, it is not intended to be used as or as a substitute for a surface damp proof membrane.


Features and benefits:

  • It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.
  • Viscous liquid.


Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

For installation onto non-absorbent subfloors, contact our Technical Service Department.

General information

Color

White

Finish

Trowelled

Material

Other

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Lifetime

Uniclass

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

M50/10 Resilient floor tiling

M50/110 Resilient floor tiling

M50/150 Sheeting

M50/170 Carpeting

M50/20 Sheeting

M50/25 Carpeting

Specification data - Acrylic and methacrylate adhesives

Form

One-component.

Open time (minimum)

20 minutes.

Guidance for specification option:

20–30 minutes depending on temperature, humidity and absorbency of the subfloor.

Colour

White.

Execution

-

Manufacturer guidance

Trowelled - Consult manufacturer for details and insert requirements.

Reinforcement

Fibre reinforced.

Coverage

1.8–3.3 kg/m² (dependent on application).

Cure time

Initial set from 90 minutes; full cure 24 hours.

Sustainability data

Contains Red List materials

No

Country of material origin

Europe

Country of product manufacture

United Kingdom

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

0 kg CO₂ eq/kg

Self declared

Recyclability

Packaging partly

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 45001:2018

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001:2015

Literature

Flooring Installation Products

Flooring Installation Products

2024 F Ball Recommended Adhesives Guide

2024 F Ball Recommended Adhesives Guide

Case studies

Slough Ice Arena - F. Ball adhesive saves ice rink installation

Slough Ice Arena - F. Ball adhesive saves ice rink installation

English Spirit Distillery - F. Ball gets into the spirit at new distillery

English Spirit Distillery - F. Ball gets into the spirit at new distillery