NBS Source
I'm a manufacturer

Supaflo Summit

Verified by manufacturer 5 months ago

CEMEX UK

A strong, durable levelling screed for high rise applications.

Jump to:
+44 (0)800 667827 Website

Application

  • Supaflo Summit can be used on steel frame, concrete frame, lightweight steel and masonry construction.
  • Can be installed as a bonded, unbounded or floating screed.
  • Suitable for high rise residential and commercial projects.
  • Can be used to meet Building Regulations Approved Document E acoustic performance requirements.


Supaflo HTC should only be used if the building envelope is complete; doors and windows should be in place and must be closed for the first 24 to 48 hours after installation to prevent drafts blowing across the surface of the screed.

For unbounded applications Supaflo SUMMIT should be installed on unfolded polythene sheeting of ideally 500 gauge or a damp proof membrane (DPM) if the subfloor comprises in situ concrete.

For floating floors, including those containing an under floor heating system, a separating layer (polythene sheeting) should be placed on top of the insulation, this may be in addition to a DPM lower in the floors construction.

Supaflo SUMMIT should only be used if the building envelope is complete; doors and windows should be in place and must be closed for the first 24 to 48 hours after installation to avoid excessive drying in the early life.

Description

Supaflo SUMMIT is a self-compacting flowing screed based on an anhydrite binder. It is specifically formulated to provide a strong and durable levelling screed for high rise applications for example where there is a requirement to pump the screed above ten floors.


Features and benefits:

  • The product is delivered to site ready mixed.
  • Forced drying: Can be forced dried after seven days.
  • Volatile organic compound (VOC): Virtually zero.

General information

Color

White

Cream

Material

Anhydrite binder

Length

Bespoke

Width

Bespoke

Height

Bespoke

Guidance for specification option:

Minimum thickness:

  • Floating: 35 mm (domestic), 40 mm (commercial).
  • Heated: 25 mm cover above pipes or cables.

Uniclass

Pr_35_31_06_73 Ready-mixed trowelled calcium sulfate screedsPrimary

CAWS

M13/10 Proprietary trowelled levelling screeds

M13/110 Proprietary trowelled levelling screeds

Specification data - Ready-mixed trowelled calcium sulfate screeds

Form

Ready mixed.

Appearance

Off-white fluid mortar.

Density

Plastic: 2150–2250 kg/m³; Dry: 1950–2050 kg/m³.

Flowrate

230–270 mm.

Guidance for specification option:

(BS 8204:7 Annex A, Truncated cone).

Reaction to fire

Class A1fl, non-combustible.

Working time

Batched, transported, placed and finished within three hours.

Loading

Five to seven days.

Drying time

Approximately 1 mm per day up to 40 mm, then 0.5 mm per day.

Bonded

25 mm.

Unbonded

30 mm.

Curing time

24 to 48 hours.

Compressive strength - 28 days

CA C25–F4.

Minimum

-

Manufacturer guidance

Floating: 35 mm (domestic). 40 mm (commercial).

Heated: 25 mm cover above pipes or cables.

Sustainability data

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

-

Manufacturer guidance

Binder 10–20 kg per tonne. Mortar: 20–40 kg/m³.


Recyclability

100%

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

-

Manufacturer guidance

Recycled content: Binder: 98%. Mortar up to 40%.


Literature

Supaflo - Technical Datasheet

Supaflo - Technical Datasheet

Supaflo Range

Supaflo Range

Supaflo Summit - Flowing Screed for High Rise Applications

Supaflo Summit - Flowing Screed for High Rise Applications

Similar products from CEMEX UK

Supaflo HTC

Supaflo Timbre

Supaflo TS-15

Supaflo TS-20