SWELLTITE® - Waterproofing Geomembrane liner
Verified by manufacturer 2 months ago
A composite bentonite waterproofing system.
Application
Typical below-ground applications include:
- Backfilled concrete walls.
- Masonry block walls.
- Earth-covered roofs.
- Tunnel roofs.
Typical above ground split-slab construction applications include:
- Plaza decks.
- Parking decks.
- Balconies.
Additionally, SWELLTITE can be used for interior split-slab applications for mechanical rooms, kitchens, and laboratory facilities. Applications may include structures under continuous or intermittent hydrostatic pressure.
Description
A waterproofing composite of sodium bentonite compound integrally bonded to a geomembrane liner. This composition combines the active waterproofing benefits of sodium bentonite with the strength and puncture resistance of a thick geomembrane liner.
Features and benefits:
- The reactive bentonite compound can expand to seal small punctures in the membrane.
- Factory controlled thickness of 2 mm.
- Engineered composite consists of a thick geomembrane liner and bentonite compound with a clear release film attached.
- Contains virtually zero VOC and can be installed to green concrete.
- Designed for below-ground vertical and horizontal structural foundation surfaces, as well as above ground split-slab construction.
- Additionally, SWELLTITE can be used for interior split-slab applications for mechanical rooms, kitchens, and laboratory facilities.
- Applications may include structures under continuous or intermittent hydrostatic pressure.
General information
Color | Grey |
Material | Sodium |
Shape | Rectangle |
Length | 10000 mm Guidance for specification option: Roll length, 10.2 m²/roll. |
Width | 1020 mm |
Uniclass | |
CAWS | J40/285 Loose-laid bentonite damp-proofing/ tanking membranes |
Specification data - Geosynthetic clay liners (GCLs)
Weight | Bentonite: 2.8 kg/m² to EN 14196. |
Integral accessories | Not required.BENTOSEAL.Guidance for specification option:
MAXBIT SKW.Guidance for specification option:
SEAMTAPE®.Guidance for specification option: Tape used to seal membrane overlap seams. AQUADRAIN®.Guidance for specification option: Prefabricated drainage composite consisting of a heavy filter fabric adhered to a high-strength plastic drainage core. WATERSTOP-RX®.Guidance for specification option:
CETBIT 300.Guidance for specification option: Self-adhesive flashing membrane for ground level terminations. CETSEAL.Guidance for specification option: Single-component polyether general sealant and adhesive. |
Primer | Not required. Guidance for specification option: For horizontal applications. MAXBIT SKW. Guidance for specification option: Adhesive for vertical/ sloping applications. Trowel grade modified bitumen-rubber waterproofing compound for detailing around penetrations and corner transitions. |
Sealing | CETCO SEAMTAPE. |
Roll size | 1.02 x 10.0 m. Guidance for specification option: 10.2 m²/roll. |
Thickness: | 2.0 mm (typical). Guidance for specification option: At 2 kPa, test method to EN ISO 9863-1. |
Resistance | Hydrostatic Pressure Resistance: 70 m to ASTM D 5385 (Mod). |
Elongation | 20% (typical) to EN ISO 10319. |
TensileStrength | 8.0 kN/m (MD and CD) to EN ISO 10319. |
Puncture resistance | 1.5 kN to EN ISO 12236. |
Flexibility at low temperature | Unaffected at –32°C to ASTM D 1970. |
Materials | Bentonite. Guidance for specification option: Waterproofing composite of sodium bentonite compound integrally bound to a geomembrane liner. |
Literature
SWELLTITE® - COMPOSITE BENTONITE WATERPROOFING SYSTEM
SWELLTITE® - COMPOSITE BENTONITE WATERPROOFING SYSTEM
Similar products from CETCO
VOLTEX DS® - Bentonite geotextile waterproofing
VOLTEX® - Waterproofing bentonite system