TRADELINE Single Frame Partition Systems Utilising Knauf Performance Plus
Verified by manufacturer 5 months ago
PSHD70-K-63(25)
PSHD70-K-63(25)
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
An economical friction-fit system to assemble frames for strong, compact and lightweight non load‑bearing partition.
Application
Sectors:
- Residential.
- Offices.
- Healthcare.
- Education.
- Commercial.
- Retail.
- RMI.
- Student accommodation.
Description
TRADELINE C Stud systems are lightweight, non-load-bearing, friction-fit systems.
They can be used within all sectors, from simple subdivision of space to providing high levels of acoustic, fire and duty performance whilst achieving heights up to 8.7m (10.2m using I stud)
Features and benefits:
- Quick to erect, lightweight and clean.
- Metal stud is dimensionally accurate and will not twist or bow.
- Range of stud widths – 50, 70, 92 and 146 mm to meet different performance requirements.
- Services are easy to install.
- Mineral wool can easily be installed to upgrade sound insulation
- Easy to cut to length using tin snips
- Frames easily fit together
- Door frames simply formed
- Sightline in Studs for lining up with plasterboard
- Stud and track formed from pre-galvanised mild steel to BS EN 10346:2015
Structural performance:
- Strength grade to BS 5234-2:1992 Annexes A-F.
Fire performance:
- Fire resistance to BS 476:1987:Part 22.
Acoustic performance:
- Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.
Installing framing for partitions:
- Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.
General information
Length | Bespoke |
Width | 102 mm |
Height | Bespoke |
Uniclass | |
CAWS | K10/30 Metal stud K10/125 Metal stud partition system |
Product range |
Specification data - Gypsum board partition systems
Framing | Tradeline Heavy Duty 'C' Stud, 70 mm. |
Insulation | Acoustic partition roll, 25 mm. |
Linings | |
Face layer | Knauf Impact Panel, 15 mm. |
Fasteners | Tradeline Drywall Screws. |
Joint treatment | Tradeline Joint Tape.Tradeline Paper Joint Tape.Tradeline Light Weight All Purpose Joint Compound.Tradeline Metal Corner Tape.Tradeline Flexible Metal Corner Tape.Tradeline Scrim Tape.Tradeline Drywall Self-Adhesive Joint Tape. |
System accessories | Tradeline Acoustic Intumescent Sealant.Tradeline PB24 Partition Brace.Tradeline FS24 Flat Bracing Strip.Tradeline ASP19B Plywood Service Support Plates. |
Fire resistance | To BS 476:1987:Part 22, 60/ 60 minutes (Integrity/ Insulation). |
Partition height | Guidance for specification option: Insert requirement based on centres specified.
Calculated based on a limiting deflection of L/240 at 200 Pascals. |
NominalThickness | 102 mm. Guidance for specification option: Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details. |
Calculated weighted sound reduction index (Rw) | 43 Rw dB Guidance for specification option: Based on the nominal system thickness. |
Centres | 600 mm. Guidance for specification option: Standard. 400 mm. Guidance for specification option: Allows for greater maximum partition heights. 300 mm. Guidance for specification option: Allows for greater maximum partition heights. |
StrengthGrade | Severe duty. |
Head/ Floor channel | Tradeline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Tradeline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Tradeline Deep Track. Guidance for specification option: Used for partition heights between 4 m and 8 m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Tradeline Extra Deep Track. Guidance for specification option: Used for partition heights between 8 m and 10.2 m. Can be used as a head track where a deflection head of up to 45 mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange. |
Sustainability data
Third party certifications
Third party certifications
BSI Kitemark
BIM Level 2 Kitemark - For Design and Construction Phase
BSI Kitemark
BSI Kitemark™ for BIM Objects
EPD
Environmental Product Declaration EPD - Drylining
ISO 9001 Quality Management
ISO 9001:2015 Quality Management System
UK Conformity Assessed (UKCA)
UKCA Declarations of Performance - Drylining
Literature
TRADELINE Partition Systems
Product Data Sheet - Drylining