Verified by manufacturer 4 months ago
vebroflex Comfort UV
A seamless, water-based, flexible, liquid-vinyl, polyurethane comfort resin flooring system with a pigmented, water-based UV seal coat.
Application suitability:
vebroflex Comfort UV / UV Plus and Decorative UV Plus is a seamless, multi-layer, flexible, polyurethane comfort resin flooring system with a pigmented UV seal coat.
vebroflex Comfort UV is a liquid-applied, environmentally friendly alternative to vinyl floor coverings, providing a hygienic finish as well as an elastic cushioning effect underfoot.
Features and benefits:
Color | Other Guidance for specification option: Choose from the RAL classic colour chart. |
Material | Polyurethane Guidance for specification option: Flexible, AgBB low emissions polyurethane body-coat (aromatic and alipatic options available). |
Uniclass | |
CAWS | M12/110 Resin flooring M12/10 Resin flooring |
Classification data | |
Levelling screed | Concrete bases and suitable cement/ sand levelling screeds. Cementitious underlayments designed to receive resin flooring. |
Primer | vebro EP Primer. Guidance for specification option: Use vebro EP Primer if the substrate is below 75% RH (Relative Humidity) or 4% CM. vebro EP DPM. Guidance for specification option: Use two coats of vebro EP DPM if the substrate exceeds 75% RH or 4% CM. vebro EP DPM Plus. Guidance for specification option: Use one coat of vebro EP DPM Plus if the substrate exceeds 75% RH or 4% CM. |
Resin flooring | Resin floor coatings. |
Primer | vebro 52 Silica Sand. Guidance for specification option: Scatter final coat of primer with vebro 52 Silica Sand ( while still wet). Allow to cure. Manufacturer guidanceFinish primer. |
System thickness | 2.0—3.0 mm. Guidance for specification option: Full system once ground. |
Body coat | vebroflex PU SL (aromatic). vebroflex PU SL UV Plus (aliphatic). vebroflex PU SL UV Decorative. |
Seal coat | vebro PU UV WB Seal (Clear Matt). Guidance for specification option: Water-based, AgBB low emissions, aliphatic, polyurethane sealer. Additional slip resistance can be achieved using vebro Anti-Slip Additive in the seal coat. |
Setting time | 24 hours (light foot traffic); 72 hours (wheeled traffic). |
Cure time | Full chemical cure in 5 days. |
Colour | Light Grey RAL 7035. Agate Grey RAL 7038. Dusty Grey RAL 7037. Concrete Grey RAL 7023. Graphite Grey RAL 7024. Black Grey RAL 7021. Traffic Black RAL 9017. Oyster White RAL 1013. Beige RAL 1001. Brown Beige RAL 1011. Signal Yellow RAL 1003. Guidance for specification option: Special colour will incur an additional supplement. Yellow Orange RAL 2000. Guidance for specification option: Special colour will incur an additional supplement. Light Pink RAL 3015. Guidance for specification option: Special colour will incur an additional supplement. Red Violet RAL 4002. Guidance for specification option: Special colour will incur an additional supplement. Pastel Blue RAL 5024. Guidance for specification option: Special colour will incur an additional supplement. Capri Blue RAL 5019. Guidance for specification option: Special colour will incur an additional supplement. Sapphire Blue RAL 5003. Guidance for specification option: Special colour will incur an additional supplement. Pastel Green RAL 6019. Guidance for specification option: Special colour will incur an additional supplement. Pastel Turquoise RAL 6034. Guidance for specification option: Special colour will incur an additional supplement. Reseda Green RAL 6011. Guidance for specification option: Special colour will incur an additional supplement. |
Slip resistance | To DIN 51130, Class R11 (Dry). Guidance for specification option: Additional slip resistance can be achieved using vebro Anti-Slip Additive in the seal coat. |
Chemical resistance | Resistant to a very wide range of aggressive chemicals and corrosive byproducts. Guidance for specification option: For a full chemical resistance breakdown contact Vebro Polymers' Technical Services team. |
VOC content | ≤100 μg/m³. Manufacturer guidanceAgBB Low Emissions: |
Elongation at break | To DIN 53504, 200%. |
Impact sound reduction | To DIN 4109, <12 dB. Guidance for specification option: Use vebroflex Matting for additional impact sound absorption <20 dB. |
Fire resistance | To EN 13501-1, Bfl-S1. |
Adhesion strength | To EN ISO 4624, >1.5 N/mm². |
Skid resistance | To BGR 181 / DIN 51130, class R9 / R10. |
Impact resistance | To EN 13813, ≥4 Nm (IR4. Manufacturer guidanceImpact strength. |
Wear resistance | To EN ISO 5470-1, ≤80 mg. |
Standard | To EN 685, 23 (private buildings); 34 (public buildings). |
Shore hardness - A | To EN ISO 868, 80 (after 28 days). |
Tear resistance | To DIN 53515, 15 N/mm². Guidance for specification option: Approx. |
TensileStrength | To DIN 53504, 9 N/mm². Guidance for specification option: Approx. |