NBS Source
I'm a manufacturer

weberfloor DPM Pro - Epoxy-based Damp Proof Membrane

Verified by manufacturer 6 months ago

Saint-Gobain Weber Third party certifications:
  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Two-component epoxy-based damp proof membrane capable of one coat application.

Jump to:
+44 (0)1525 718877 Website

Application

  • For application onto concrete and cement based substrates.
  • Can be applied on to concrete or cement based screed surfaces with a moisture content of up to 98% RH (measured using a hygrometer) when installed in accordance with Weber recommendations, to facilitate early overlay of moisture sensitive finishes.

Description

Two-component epoxy-based damp proof membrane that is capable of being applied in one coat, dependent upon the condition of the substrate and quality of workmanship to ensure full coverage is achieved at the required thickness.


Features and benefits:

  • Easy to apply.
  • Reduces project timescales allowing early installation of floor finishes.
  • Suitable for substrate up to 98% RH.
  • Accelerates project timelines .
  • weberfloor screed and smoothing compounds can be applied in as little as three hours.


Surfaces should have a minimum pull-off strength of 1 MPa for commercial or residential areas and 1.5 MPa for industrial areas.

General information

Material

Epoxy

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/130 Cold-applied damp-proofing

Specification data - Smoothing and levelling underlay compounds

Material

Two-component, epoxy-based.

Coverage

63.4 m² (20 kg) or 31.7 m² (10 kg) per mixed components, at 250 µm.

Water vapour transmission

To BS EN ISO 7783, 0.4 g/m²/day (at 250 µm).

Water permeability

To BS EN 1062-3, 0.001 kg/m²·h^0.5 (at 250 µm).

Adhesive bond

To BS EN 1542, 3.6 MPa.

Wet concrete adhesion

Compatibility with wet concrete to EN 13578, 3 MPa.

Application temperature

Minimum 5°C.

Pot life

25–35 minutes (1 litre at 20°C).

Sustainability data

Material

Epoxy

Third party certifications

ISO 45001 Health and Safety Management

ISO 45001:2018

ISO 9001 Quality Management

ISO 9001:2015

Literature

weberfloor DPM Pro - Technical datasheet

weberfloor DPM Pro - Technical datasheet

Inspiration Guide

Inspiration Guide

Solutions for construction - Introducing Weber

Solutions for construction - Introducing Weber

weberfloor application guide

weberfloor application guide

Flooring Guide

Flooring Guide

Supply Chain Sustainability School Gold Status

Supply Chain Sustainability School Gold Status