NBS Source
I'm a manufacturer

weberfloor polished finish system

Verified by manufacturer 5 months ago

Saint-Gobain Weber Third party certifications:
  • EPD

    EPD

    Certificate type

  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Durable design floor with the option to create a high-precision polished finish, suitable for industrial, commercial and residential use.

Jump to:
+44 (0)1525 718877 Website

Application

  • If substrate is in need of repair please see weberfloor substrate repair system
  • Cannot be used on external projects
  • Substrate must have a pulloff strength ≥1.5MPa in industrial areas and ≥1.0MPa in residential and commercial areas

Description

weberfloor polished finish system gives you everything you need to level and smooth a substrate with up to 98% relative humidity prior to polishing. Suitable for depths as low as 4mm, this system can be walked on in as little as 2 hours and polished in as little as 24 hours.


Features and benefits:

  • Suitable for concrete, cementitious or anhydrite substrates
  • Provides an ultra smooth surface, perfect for polishing
  • System can be applied at as little as 4mm
  • Foot traffic after 2 hours
  • Can be polished in as little as 24 hours.
  • Pump or hand applied
  • Compatible with weberfloor 4716 acrylic primer
  • Compatible with moisture control systems that allow application up to 98% relative humidity

General information

Color

Grey

Finish

Polished

Material

Cementitious

Shape

Formless

Uniclass

Ss_30_42_15_15 Cementitious wearing screed systemsPrimary

CAWS

M13/120 Proprietary self smoothing levelling screeds

M13/20 Proprietary self-smoothing levelling screeds

M10/192 Proprietary self smoothing wearing screeds

M10/160 Proprietary self smoothing levelling screeds

M10/220 Proprietary levelling/wearing screeds

M10/22 Proprietary levelling/wearing screeds

Product range

Flooring solutions / Aesthetic solutions
Flooring solutions / Bonded solutions

Specification data - Cementitious wearing screed systems

Preparation

Preparation of substrate.

Bonding coat

Not required.

Cementitious bonding compounds.

Guidance for specification option:

weberfloor base rapid 4360.

  • Rapid drying self-smoothing thick base screed.
  • Pump or hand applied, self-smoothing, thick base or renovation screed for floors with Low Dust TechnologyTM, which gives a extra strong base layer for receiving tiles, thin topping screeds or industrial screeds. The product is formulated from special cements, aggregates and chemical admixtures.

Screed

Self-smoothing wearing screed mixes.

Guidance for specification option:

weberfloor industry pro top 4610.

  • Premium self-smoothing industry top screed.
  • Pump or hand applied, self-smoothing, very hard wearing screed, with Low Dust Technology™, which can level industrial substrates and is ideal as a final finished layer. The product is formulated from special cements, aggregates and chemical admixtures.

Surface treatment

Polished finish.

System accessories

Not required.

weberfloor DPM.

Guidance for specification option:

  • Optional moisture control system.
  • Two-component epoxy based chemical damp proof membrane that is capable of being applied in one coat, dependent upon the condition of the substrate and quality of workmanship to ensure full coverage is achieved at the required thickness.

Primer

Styrene acrylate primer.

Guidance for specification option:

weberfloor 4716.

  • Designed for priming (pre-treating) all substrates prior to application of weberfloor products.
  • weberfloor 4716 should be diluted with clean water.

Cure time

Two hours (foot traffic); 24 hours (forklift traffic).

Slip resistance

65 PVT (dry); 40 PVT (wet); 16 PVT (oil).

Manufacturer guidance

weberfloor industry pro top 4610.

CompressiveStrength

C35.

Manufacturer guidance

weberfloor industry pro top 4610.

Flexural strength

F10.

Manufacturer guidance

weberfloor industry pro top 4610.

Wear resistance

RWA 100.

Guidance for specification option:

RW (defined) class.

Manufacturer guidance

weberfloor industry pro top 4610.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Cementitious

Third party certifications

Third party certifications

EPD

EPD

EPD Certificate (weberfloor rapid floor screeds)

ISO 45001 Health and Safety Management

ISO 45001:2018

ISO 9001 Quality Management

ISO 9001:2015

Literature

weberfloor polished finish system - System spec card

weberfloor polished finish system - System spec card

weberfloor 4716 - Technical datasheet

weberfloor 4716 - Technical datasheet

weberfloor industry pro top 4610 - Technical datasheet

weberfloor industry pro top 4610 - Technical datasheet

weberfloor industrial base 4600 - Technical datasheet

weberfloor industrial base 4600 - Technical datasheet

weberfloor 4720 epoxy primer - Technical datasheet

weberfloor 4720 epoxy primer - Technical datasheet

weberfloor DPM Pro - Technical datasheet

weberfloor DPM Pro - Technical datasheet

Inspiration Guide

Inspiration Guide

Solutions for construction - Introducing Weber

Solutions for construction - Introducing Weber

weberfloor application guide

weberfloor application guide

Flooring Guide

Flooring Guide

Supply Chain Sustainability School Gold Status

Supply Chain Sustainability School Gold Status