Compare

webertherm XM panel acrylic system (MFD) External Wall Insulation

Name: webertherm XM panel acrylic system (MFD) External Wall Insulation
Brand: Saint-Gobain Weber
SKU: aWPX4dwvFDzq2PjhNFaYqY

Verified by manufacturer 6 months ago

Saint-Gobain Weber

Third party certifications:

BBA Agrément Certificate
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type

External wall insulation with non-combustible insulation board and a water resistant textured finish

Jump to:

BOS

+44 (0)1525 718877 Website

Application

webertherm XM panel acrylic system (MFD) is a traditional multi-layered external wall insulation system ideal for new build projects to improve thermal performance and provide the building with an attractive façade.

This system uses non-combustible mineral fibre insulation and is finished with an acrylic textured finish which is available in over 100 colours.

Suitability:

Suitable only for buildings under 11 metres.
For buildings above 11m, please see webertherm XM panel silicone system (MFD).

Final façade finish:

Finished with weberplast TF acrylic textured finish with water resistance and available in over 100 colours.

Reaction to fire:

B-s1,d0 reaction to fire classification in accordance with BS EN 13501. Extended application report on request.
Incorporates non-combustible mineral fibre (webertherm MFD) insulation.

Certification & requirements:

BBA approved.
NSAI approved.
Able to satisfy PAS 2030:2019 and PAS 2035:2019 requirements.

Description

[Formerly known as webertherm XM FMR018 P]

General information

Color	- Manufacturer guidance 160 standard colours.
Finish	Acrylic Textured Manufacturer guidance weberplast TF
Material	Mineral fibre

Uniclass	Ss_25_45_72_28 External wall insulation systemsPrimary
CAWS	M21/20 External wall insulation system . . . . . . M21/210 External wall insulation system

Product range	External wall insulation systems / For panel External wall insulation systems / Reaction to fire: B-s1,d0

Specification data - External wall insulation systems

Support rails and brackets	-
Boards	-
Material	12 mm minimum thickness cement particle board for steel frame to provide appropriate support (adequate thickness and stiffness) for the webertherm XM EWI system without deflection or edge protrusions.
Insulation	-
Material	MFD.
Adhesive	weberend LAC rapid.
Additional mechanical fixings	Guidance for specification option: Confirm project requirements and wind load details with Weber and insert requirements.
Fire barriers and stops	-
Material	MFD.
Fixings	Stainless Steel (At 400 mm centres).
Movement joints	-
Form with	- Manufacturer guidance Please contact Weber for bespoke details.
Render carrier or reinforcement	-
Material	Balanced, open weave, alkaline resistant glass fibre meshcloth.
Mesh size	3.5 x 3.5 mm.
Render	-
Application	Can be hand applied or sprayed.
Material	weberend LAC rapid.
Decorative finish	weberplast TF.
Colour	- Manufacturer guidance 160 standard colours available.

Density	First 15 mm 160 kg/m³, balance 100 kg/m³.
Thickness range	57.5–207.5 mm.
Roll size	1 x 50 m.
Fire performance:	B-s1,d0 when classified in accordance with BS EN 13501-1.
Product Reference	webertherm XM MFD FMR018 P