NBS Source
I'm a manufacturer
Compare variants

Boulevard™ Non-Cyclonic (COLORBOND® Steel)

Verified by manufacturer over a year ago

COLORBOND® Matt

Fielders Variant:

Wall cladding system with a flat, recessed joint look.

Jump to:
+61 8 8292 3611 Website

Application

Suitable for wall cladding applications that require a flat, recessed look.


AUSTRALIAN STANDARDS

 

Published load capacity data is derived from testing in accordance with:

  •       AS 4040.0:1992.
  •       AS 4040.1:1992.
  •       AS 4040.2:1992.
  •       AS 4040.3:2018.

 

Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:

  •       AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
  •       AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
  •       AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
  •       AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.

 

Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.

 

Fielders steel products comply with:

  •       AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
  •       AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
  •       AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.

Description

Boulevard™ is a wall cladding system with a flat, recessed joint look. This is achieved through interlocking panels that are pierce-fixed and installed with a ventilated air space. Some features of this system include:

  • Contemporary design.
  • Can be laid horizontally or vertically.
  • Available in a wide array of colours and finishes.
  • Available in a range of sizes.

General information

Material

Steel.

Shape

Rectangle

Warranty description

-

Manufacturer guidance

Covered by BlueScope material warranties, subject to project assessment and terms and conditions.

Uniclass

Pr_25_71_51_15 Carbon steel sheetsPrimary

SpeedSpec

07462 Cladding External Walls

NATSPEC National Classification System

0436 Cladding – Profiled and Seamed Sheet Metal

SpecPack

07600 Metal Roofing, Siding and Roof Plumbing

Specification data - Carbon steel sheets

Standards

To AS 1397, AS/NZS 1365 and AS/NZS 2728.

Guidance for specification option:

Installation of the cladding should be in accordance with AS 1562.1 and HB 39.

Structural grade

G300.

Coating

-

Class

AM100.

Size

-

Length

-

Manufacturer guidance

Sheets are supplied custom cut to length to suit project requirements. Transportation limits apply.


Panels come in lengths of 0.50 m to 8.0 m. Provide manufacturing tolerance of ±7 mm in length.

Width

285 mm.

485 mm.

Manufacturer guidance

Comes with a side depth of 22 mm. Provide manufacturing tolerance of ±4 mm in cover width.


Other widths are available, subject to minimum order quantity. Contact local manufacturer for details.

Thickness

0.55 mm.

Guidance for specification option:

Total Coated Thickness of 0.60 mm.

0.75 mm.

Guidance for specification option:

Total Coated Thickness of 0.80 mm.

Subject to minimum order quantities.

Manufacturer guidance

Refers to Base Metal Thickness or BMT.

Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material.

Finish

-

Applied

Painted, matt finish.

Colour

Basalt.

Dune.

Monument.

Shale Grey.

Surfmist.

Material

COLORBOND® steel.

Thermal expansion

2.9 mm average per 5.0 m.

Manufacturer guidance

Computed at 50° C change.

Frame or support

Plywood.

Guidance for specification option:

Affix with 10g-16 x 25 mm Wafer or low profile Hex Head Type 17 screw with a minimum class 3 coating.

Steel Batten.

Guidance for specification option:

Steel battens should be 40 mm x 0.75 mm BMT G550, to be supported at 450 mm centres maximum.


Affix with 10g-16 x 16 mm Wafer or low profile Hex Head Tek screw with a minimum class 3 coating.

Manufacturer guidance

Refers to recommended substrate and fasteners if product is to be installed without insulation.

Mass

5.31 – 5.92 kg/m² (0.55 mm BMT).

6.71 – 7.47 kg/m² (0.75 mm BMT).

Insulation

-

Manufacturer guidance

When insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density.


When insulation is required, Fielders® recommends the use of a thermal spacer.

Installation

-

Manufacturer guidance

Boulevard™ needs to be fitted on a water tight barrier, which may consist of a precast wall, steel sheeting backing (such as Panelform™) or another waterproof membrane.


Fielders® recommends the use of Panelform™.

Sustainability data

Country of material origin

Australia

Country of product manufacture

Australia

Recyclability

100% Recyclable.

Similar products from Fielders

Boulevard™ Cyclonic (COLORBOND® Steel)

Boulevard™ Cyclonic (COLORBOND® Steel)

Cadence™ Non-Cyclonic (COLORBOND® Steel)

Cadence™ Non-Cyclonic (COLORBOND® Steel)

Grandeur® Non-Cyclonic (COLORBOND® Steel)

Grandeur® Non-Cyclonic (COLORBOND® Steel)

Neo-Roman™ Non-Cyclonic (COLORBOND® Steel)

Neo-Roman™ Non-Cyclonic (COLORBOND® Steel)

Prominence™ Cyclonic (COLORBOND® Steel)

Prominence™ Cyclonic (COLORBOND® Steel)

Prominence™ Non-Cyclonic (COLORBOND® Steel)

Prominence™ Non-Cyclonic (COLORBOND® Steel)