Flexible intumescent gap seals

Preformed intumescent strip sealant.

Fire stopping strips for penetration seals and linear joints.

An intumescent butyl strip sealant.

A specialized glazing tape based on ceramic fibres, for glazing of non-insulating and insulating fire rated glass into internal timber and steel screens and doors with glass from major manufacturers.

Intumescent, butyl strip sealant, which can provide four hours resistance to the passage of fire and smoke when used to construct flange and lap joints in fire rated metal ducting.

An intumescent strip sealant which can provide 60 minutes resistance to the passage of fire when used to glaze fire rated glass into internal timber doors and softwood or hardwood timber screens.

A fire-resistant barrier placed between roof cover or tiles and the party walls or spandrel panels.

Intumescent linear firestop seals for vertical and horizontal joints.

Intumescent pipe wraps, CE marked.

556 Firestop Slab has been developed to provide two hours firestopping in building cavities up to 300 mm wide. The system has been tested by Warrington Fire Research to BS EN 476-20.It is manufactured using 75 mm thick high density rock fibre slab foil faced on both sides. Firestop Slab has rebated ends for a secure fit and is available in full slabs 1160 x 900 mm, or factory cut to size.It can provide two hours fire resistance in masonry cavity voids and between the edge of a concrete floor slab and curtain walling systems.Suitable for cavities 50–300 mm wide.