NBS Source
I'm a manufacturer
Safety Fabrications Limited

Safety Fabrications Limited

Safety Fabrications - manufacturers of the Ascent range of Access & Safety Products.

+44 (0)1142852203 Website

Sort by:

Showing 1-17 of 17

Sponsored
working platform and walkway system - Ely Cathedral, Cambridgeshire

working platform and walkway system - Ely Cathedral, Cambridgeshire

Safety Fabrications Limited

The Ascent Aluminium Roof Access Walkway was specified to meet the clients requirement to create a level anti-slip route across the roof for both visitors and maintenance personnel. The Ascent Aluminium walkway is laid to the lead roof covering using non-penetrative support feet. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.
Sponsored
working platform and walkway system - Manchester Airport

working platform and walkway system - Manchester Airport

Safety Fabrications Limited

The Ascent Aluminium Roof Access Walkway was specified to meet the clients requirement to create a level anti-slip route across the roof for maintenance personnel. The Ascent Aluminium walkway is tested for use on the aluminium standing seam roof and is secured back to the roof sheet using a proprietary support clamp. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardaril, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.
Sponsored
working platform and walkway system - Asda, Burnley

working platform and walkway system - Asda, Burnley

Safety Fabrications Limited

The Ascent Aluminium Roof Access Walkway was specified to meet the clients requirement to create a level anti-slip route across the roof for maintenance personnel. The Ascent Aluminium walkway is tested for use on the metal profiled roof sheet and is secured back to the roof sheet using a proprietary fixing. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.
Sponsored
Ascent Fall Protection Posts to Snowdon (Hafod Eryri) Mountain Café

Ascent Fall Protection Posts to Snowdon (Hafod Eryri) Mountain Café

Safety Fabrications Limited

Ascent anchor posts were chosen to protect workers accessing the roof of the UK's highest building - the mountain café on the summit of Hafod Eryri (Mount Snowdon) at the heart of the Snowdonia National Park and Wales highest mountain at 1085m above sea level. The Ascent Anchor posts form the structural anchors to secure the Latchway mansafe guided type fall arrest system to the structure of the granite & oak clad building.
Sponsored
Ascent Rooflight Fall protection Cover, Orgreave, Sheffield

Ascent Rooflight Fall protection Cover, Orgreave, Sheffield

Safety Fabrications Limited

Ascent Rooflight Covers were specified by Eurosafe Solutions as part of a Safe Access strategy to allow maintenance personnel to frequently access the roof areas to undertake Planned Preventative Maintenance (PPM) works at an office / warehousing premises in Orgreave, Sheffield. The Ascent Rooflight covers are a freestanding unit that sits above the potential fall hazard of the glazed rooflight. Formed from an angular aluminium framework with mesh infill the rooflight covers do not overly restrict light penetrating the rooflight. The Rooflight covers are supported on small spreader plates which provide a non-penetrative support solution on the flat felt roof. The Ascent Rooflight covers are testing in accordance with ACR(M) 001:2014 Test for Non-fragility of Large Element Roofing Assemblies (fifth element) and manufactured following 1090 factory production control procedures allowing CE/UKCA marking as required with all Safety critical components as per the Construction Product regulations 2022  
Sponsored
D-i.D Tag holders used on Safety Systems on the Queen Elizabeth II Line – Whitechapel Station.

D-i.D Tag holders used on Safety Systems on the Queen Elizabeth II Line – Whitechapel Station.

Safety Fabrications Limited

Leading Safety Installer Eurosafe Solutions Ltd chose the D-i.D Tag holder to hold Safety critical information on the roof of the recently completed Whitechapel station – part of the new Queen Elizabeth II line.The D-i.D Tag holder is designed to provide a weather & UV resistant cover to Safety Critical information.The purpose of an identity Tag on a fall protection system / Ladder or guardrail is to tell the user at a glance if the safety system is “in-test”. To perform this task successfully the Tag has to be clearly visible & easy to read. A tag which is eligible, smudged or UV faded does not give the user the information he/she requires.The D-i.D Tag holder is designed to give the end user the confidence to make an informed Safety Critical decision because;·        It is of a unique two part construction: the back plate holds the Tag snuggly in place and the front cover is transparent whilst providing weather / UV resistance.·        It is tamper proof – The D-i.D Tag is held in place by a pair of cable ties. The cable ties attach to the Tag holder in such a way as to prevent the removal of the tag without cutting the tie.·        In the event the tag insert is removed the Tag contains a warning that the system should NOT be used.·        The backplate of the Tag is opaque – this is to reduce the possibility of the D-i.D Tag holder spinning such that the back is visible to the end user & incorrect information is read. Eurosafe chose the D-i.D Tag holder as it gave them & their client confidence that the safety critical information it contained would be clearly displayed and legible for future users of the MSA Latchway mansafe systems installed.
Sponsored
D-marc - demarcation a Collective Protection Solution

D-marc - demarcation a Collective Protection Solution

Safety Fabrications Limited

D-marc 105TM demarcation system – a collective protection demarcation solution. The doctrine “prevention is better than cure” is one that rings true in so many instances. Common sense tells us that it much better to prevent a fall than it is to arrest the fall once it has occurred. The Working at Height Regulations (WAHR’s) 2005 reinforce this argument. Whilst in many instances it is not always practical to remove the risk of a fall; rainwater outlets will always require cleaning, rooftop plant will require regular maintenance etc.. there are a number of ways to protect the worker from the immediate hazard the fall presents. The simplest way and that which much closely echo’s the doctrine “prevention is better than cure” is to keep the worker away from the fall hazard. The most effective way of achieving this and that which is advocated by the WAHR’s is through the provision of a Collective Protection solution. A collective protection solution is one which will “collectively protect all those who access the area”. In a rooftop situation where the hazard is a fall from the roof edge, Collective protection can be achieved by raising the parapet or through the installation of a full perimeter guardrail. Alternatively the worker can be kept a safe distance from the roof edge through the installation of a demarcation system. –Health and Safety in Roofwork HSG 33 states that “where work is not done at the edge, demarcation barriers can be provided at a safe distance from the edge (usually at least 2 meters), e.g. work on an air conditioning unit in the middle of a roof.”.      An example of where The D-marc demarcation system has recently been specified and installed at Crown Woods College, Eltham to provide safe access to rooftop mounted plant. The client was looking for a solution that would;Provide a collective protection solutionNot penetrate the existing roof covering and therefore not compromise the roofs waterproofing or air-tightness.Be lightweight so as not to require an additional support structure.Provide easily identifiable access routes ensuring no exposure to fall hazardsBe low maintenance and ideally have good environmental credentials.  D-marc was able to meet all these criteria and has the additional benefit of giving the customer the piece of mind that whilst it does not rely upon any means of mechanical fixing to the roof structure, it is tested to withstand wind speeds in excess of 105 mph. Such testing is a requirement of BS6399-2 Code of Practice for Wind loads which states that all components that form a building are required to withstand a 1 in 50 year wind speed.   D-marc was used extensively on the project as part of the collective protection demarcation system to create clearly defined safe access routes across the roof to theplaces requiring regular maintenance work. Having created the safe routes to the places of work, the D-marc was then used to demarcate the safe working zones upon the roof top. To ensure a complete collective protection solution was provided in isolated areas where it was not possible to keep the worker away from the fall hazard a guardrail was used. The easy to install, non penetrating D-marc system creates a clearlydefined access route and a safe working zone for all those undertaking regular rooftop maintenance works.
Sponsored
Fixed utilitarian access system - permanently-fixed vertical access ladder to Museum of Science & Industry - Manchester

Fixed utilitarian access system - permanently-fixed vertical access ladder to Museum of Science & Industry - Manchester

Safety Fabrications Limited

The Ascent Aluminium fixed ladder system was specified to create a permanent safe access route to the roof for maintenance personnel. As the fixed access ladder was to be installed in a prominent location adjacent the buildings front entrance there was a requirement to ensure that access was restricted with the specification of an anti-climb ladder guard & bottom hoop cover. Hoops were provided throughout for fall protection. The ladder was designed in accordance with BS EN 4211:2005 + A1 2008 and was manufactured in accordance with CE 1090 factory production control procedures.
Sponsored
Fixed utilitarian access system, permanently-fixed vertical ladder system, multi-stage with mid-height platform and anti-climb guard

Fixed utilitarian access system, permanently-fixed vertical ladder system, multi-stage with mid-height platform and anti-climb guard

Safety Fabrications Limited

The Ascent Aluminium fixed ladder access system was specified to create a permanent safe access route to the roof for maintenance personnel. As the overall height exceeds 10m the ladder was required to be broken with a mid-height rest platform ensuring no single ladder length exceed 6m. Hoops were provided throughout for fall protection, an anti-climb plate was fitted at the base. The ladder was designed in accordance with BS 4211:2005+A1 2008 and the ladder was manufactured in accordance with CE 1090 factory production control procedures.
Sponsored
Handrail system : Ascent Hatch Guardrail

Handrail system : Ascent Hatch Guardrail

Safety Fabrications Limited

The Ascent Roof Hatch Guardrail was developed to meet the need to protect workers as they Ascend / Descend through an open roof access hatch.. The Ascent Roof Hatch Guardrail is designed as an integral part of the roof hatch and its structure. This ensures that roof integrity is maintained – limiting potential future maintenance issues.The guardrail protects worker from a fall through the open roof hatch. The Ascent Hatch Guardrail was specified on this project by AOV Systems Ltd as part of their Safe Access strategy. Manufactured following 1090 factory production control procedures allowing CE/UKCA marking as required with all Safety critical components as per the Construction Product regulations 2022
Sponsored
Industrial stair system - Ascent Step over unit

Industrial stair system - Ascent Step over unit

Safety Fabrications Limited

The Ascent Up and On step unit was specified to create a safe means of access between different roof levels external to the roof of a city centre residential block. The building is has a single ply membrane roof covering and it was the clients desire not to penetrate the roof; hence the step over / stair unit is supported on rubber spreader feet which provide a non-penetrative support solution. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.
Sponsored
Industrial stair system - Edinburgh Airport

Industrial stair system - Edinburgh Airport

Safety Fabrications Limited

The Ascent Up and Over step unit / Industrial stair system was specified to create a safe means of access up & over items of mechanical plant & equipment to the roof of the airport terminal building. The Industrial stair unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.
Sponsored
Industrial stair system - Wolfson Building, University of Glasgow

Industrial stair system - Wolfson Building, University of Glasgow

Safety Fabrications Limited

The Ascent stair unit - Industrial stair system was specified to create a safe means of access over roof mounted mechanical and electrical plant and equipment. The roof area is tightly packed with Air conditioning plant creating a unique challenge to design a safe means of access across it. The Ascent step over / stair unit is able to accommodate spans up to 4.5m and was able to be utilised to create a safe access route. The step over unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.
Sponsored
Permanently fixed roof ladder system – Ascent Aluminium Roof Steps ; Sheffield Aerospace Manufacturers.

Permanently fixed roof ladder system – Ascent Aluminium Roof Steps ; Sheffield Aerospace Manufacturers.

Safety Fabrications Limited

The Ascent Aluminium Roof Access Steps were specified to meet the clients requirement to create a safe access route up & over the “saw-tooth” roof for maintenance personnel. In this instance the Ascent steps were specified for use with an adjacent MSA Latchways climb-latch fall protection system. If collective protection is required handrails can be supplied to one or both sides of the steps. The Ascent Aluminium steps were specified for this project by Eurosafe Solutions Ltd a specialist fall protection company who also installed steps. The Ascent Aluminium walkway steps are tested for use on the aluminium standing seam roof and are secured back to the roof sheet using a proprietary support clamp. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.The walkway steps can be configured with a handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty) and can be supplied with an optional toe-board if required. The system can achieve these loadings without the need for additional bracing, allowing the walkway to be placed against the area to be accessed. UKCA / CE marked. Designed & Tested in accordance with BS EN 516:2006 Class 1 Type C. Designed & Tested in accordance with BS EN ISO 14122-3:2016 where a handrail is fitted. Designed & Tested in accordance with BS 4592-0:2006+A1:2012 for loadbearing and BS 7976-2:2002+A1:2013 for anti-slip. With or without handrail.Standardized modular system roof walkway system. Can be supplied with a range of fixing kits to suit different roof profiles.
Sponsored
Permanently-fixed ladder system - companionway / ships ladder system- Aldi retail stores across the UK

Permanently-fixed ladder system - companionway / ships ladder system- Aldi retail stores across the UK

Safety Fabrications Limited

The Ascent Aluminium companionway / ships ladder system was specified to create a permanent safe access route to the roof of refrigeration units within Aldi stores for maintenance personnel. A companionway was chosen as it is deemed preferable to a vertical ladder where frequent access is required. The ladder designed in accordance with BS 4211:2005 + A1 2008 was manufactured in accordance with CE 1090 factory production control procedures. The ladders have been installed within around 700 stores across the UK.
Sponsored
Permanently-fixed vertical ladder system - fixed access ladder to roof access hatch at Sheffield University Campus Building

Permanently-fixed vertical ladder system - fixed access ladder to roof access hatch at Sheffield University Campus Building

Safety Fabrications Limited

The Ascent Aluminium fixed ladder system was specified to create a permanent safe access route to the roof via a roof access hatch at Sheffield University Hoops were provided throughout for fall protection and the ladder was designed to BS 4211:2005 + A1 2008 and was manufactured in accordance with CE 1090 factory production control procedures. To assist the user when exiting on to the roof surface a ladder up post was included within the design. The ladder up post provides something for the user to grab hold of when both climbing out of & into the hatch, providing an additional level of user security.
Sponsored
Permanently-fixed vertical ladder system; Cheadle Life Leisure - Greater Manchester

Permanently-fixed vertical ladder system; Cheadle Life Leisure - Greater Manchester

Safety Fabrications Limited

The Ascent Aluminium fixed ladder access system was specified to create a permanent safe access route to the roof for maintenance personnel. As the ladder provided access between two membrane roofs there was a requirement to specify non-penetrative support feet at both head & base. Hoops were provided throughout for fall protection and the ladder was designed in accordance with BS 4211:2005+A1 2008 and manufactured in accordance with CE 1090 factory production control procedures.

Showing 1-17 of 17