Safety Fabrications Limited
Safety Fabrications - manufacturers of the Ascent range of Access & Safety Products.
Default
Showing 1-22 of 22
Ascent Aluminium Anti-slip Walkway for profile Roof Sheets
Safety Fabrications Limited
The Ascent Aluminium walkway is a standardised modular system allowing specifiers to design compliant walkways for access on all major manufacturers and their metal profile composite & built up on site roofing systems.
Manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The walkway can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent walkway is unique in that it can achieve this loading without the need for additional bracing - allowing the walkway to be placed against the area to be accessed.
The walkway can be levelled to falls across the pitch of the roof or ramped / stepped when ascending. The walkway is mechanically affixed to the roof covering. Can be PPC
Ascent Plant Maintenance Access Platform
Safety Fabrications Limited
The Ascent Aluminium walkway is a standardised modular system allowing specifiers to design compliant walkways for access on all major manufacturers and their flat roofing systems.
The Ascent Aluminium walkways are manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The walkway can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent walkway is unique in that it can achieve this loading without the need for additional bracing - allowing the walkway to be placed against the area to be accessed.
The walkway can be either placed on the roof; on Rubber spreader feet or mechanically affixed to the roof covering. The walkway can be Powder-coat finish as customer requires
Ascent Step Unit Installation Instructions
Safety Fabrications Limited
Ascent Step over Units provide simple access solutions to complex access issues, including how to get over Mechanical & Electrical services including ducting, pipework, cable trays and parapet walls without compromising the health and safety of the worker. These instructions provide guidance for the installer to ensure the units are assembled in accordance with the manufacturers design intent.
Ascent Companionway / ships ladder
Safety Fabrications Limited
Ascent Companionway / Ships ladders provide a simple access solutions to roof or raised flooring height for maintenance and other occasional use.
The Companionway ladder (or ships ladder as it is often known) is predominantly the ladder of choice where more frequent access is required but space is at a premium. The ladder is inclined at between 60-75 degrees and comprises treads rather than rungs, complemented with a handrail / grab-rail to either side of the ladder flight.
The companionway ladder is manufactured following strict CE / UKCA guidelines and can be supplied with a range of fixing brackets to secure back to the structure. The Companionway ladder can be supplied in either Mill finished aluminium or Galvanised mild steel and can be powder coated to meet clients requirements.
Ascent Access Ladders - Installation Instructions
Safety Fabrications Limited
Aluminium fixed vertical ladders are designed to provide safe access for heights between 2 - 10m in a single flight all in accordance with BS 4211. (larger sizes are available). The Ascent ladders can be supplied with / without safety cage and guardrail. These instructions provide guidance for the installer to ensure the units are assembled in accordance with the manufacturers design intent.
Ascent Aluminium Anti-slip Walkway for Standing Seam Roofs
Safety Fabrications Limited
The Ascent Aluminium walkway is a standardised modular system allowing specifiers to design compliant walkways for access on all major manufacturers and their standing seam roofing systems.
Manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The walkway can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent walkway is unique in that it can achieve this loading without the need for additional bracing - allowing the walkway to be placed against the area to be accessed.
The walkway can be levelled to falls across the pitch of the roof or ramped / stepped when ascending. The walkway is clamped to the standing seam of the roof profile. Can be PPC if required
Ascent Aluminium Anti-slip walkway for Flat Membrane Roofs
Safety Fabrications Limited
The Ascent Aluminium walkway is a standardised modular system allowing specifiers to design compliant walkways for access on all major manufacturers and their flat roofing systems.
The Ascent Aluminium walkways are manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The walkway can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent walkway is unique in that it can achieve this loading without the need for additional bracing - allowing the walkway to be placed against the area to be accessed.
The walkway can be either placed on the roof; on Rubber spreader feet or mechanically affixed to the roof covering. The walkway can be Powder-coat finish as customer requires
Ascent Step Over units
Safety Fabrications Limited
Ascent Step over Units provide simple access solutions to complex access issues, including how to get over Mechanical & Electrical services including ducting, pipework, cable trays and parapet walls without compromising the health and safety of the worker. They are typically 800mm wide with handrail to both sides. They can be provided in both Mild Steel galvanised & Aluminium Mill Finished or Powder Coated to your requirements. The step over units can be both Free standing supported on non-penetrative rubber feet or affixed to the structure of the building.
Ascent Fall Protection & Abseil Posts
Safety Fabrications Limited
Ascent Fall protection & Ascent abseil anchor posts are designed and tested for use as Fall Protection anchor devices as EN 795 Class A1 anchors & EN 795 Class C. And, as abseil anchor devices as BS 8610.
Primarily designed for use on reinforced concrete Flat roofs the posts are manufactured from Galvanised mild steel following strict CE / UKCA manufacturing procedures.
The posts are available in a range of heights from 200mm - 800mm to suit the roofs build up. Manufactured from Mild steel the posts are typically galvanised, but can be supplied powder coated to suit client requirements
Ascent Aluminium ladders
Safety Fabrications Limited
Ascent Aluminium ladders are designed & CE / UKCA manufactured to provide safe access / egress to and from rooftops, roof access hatches & raised platforms. The ladders can be supplied with or without hoops for fall protection and with a range of top access platforms & fixing brackets to suit the background / building to which they will be affixed. The ladders are supplied in a maximum flight of upto 10m, Where multiple flight ladders are required intermediate landing platforms can be supplied. The ladders can be supplied with a range of accessories to prevent unauthorised access and to improve safety. The ladders can be powder-coated to customer requirements.
Ascent Access Ladders - Mild Steel
Safety Fabrications Limited
Ascent Access Ladders are manufactured following CE / UKCA accredited procedures in both Galvanised Mild Steel & Aluminium. Available up to 10m in a single flight, or in multiple flights separated by landing platforms. The ladders can be galvanised and powder-coated to meet a clients specific requirements. The ladders can be supplied with or without hoops for fall protection. A range of additional safety & security items can be supplied including ladder-up posts for hatch access, self-closing gates & anti-climb security covers. A range of proprietary brackets are available to secure the ladder to the building.
Aluminium Walkway Steps Test Report
Safety Fabrications Limited
The Ascent Aluminium stepped walkway is a standardised modular system allowing specifiers to design compliant steps / walkways for access on all major manufacturers and their metal profile composite & built up on site roofing systems.
Manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The steps can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent steps are unique in that it can achieve this loading without the need for additional bracing - allowing the steps to be placed against the area to be accessed.
The steps are typically mechanically affixed to the roof covering by means of standing seam clamp or self-drilling tech screws. Can be Powder coated
Aluminium walkway test report
Safety Fabrications Limited
The Ascent Aluminium walkway is a standardised modular system allowing specifiers to design compliant walkways for access on all major manufacturers and their metal profile composite & built up on site roofing systems.
Manufactured in accordance with CE / UKCA certifications. They are tested to BS EN 516:2006 Class 1 Type C. The walkway can be configured with handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty). The Ascent walkway is unique in that it can achieve this loading without the need for additional bracing - allowing the walkway to be placed against the area to be accessed.
The walkway can be levelled to falls across the pitch of the roof or ramped / stepped when ascending. The walkway is mechanically affixed to the roof covering. Can be PPC
Ascent Aluminium Products Life Cycle Assessment & Durability Statement
Safety Fabrications Limited
This document gives guidance on durability, predicted service life and design life of the Ascent Range.
This document should be read in conjunction with BS 7543:2003 which sets out common factors which can affect the service life of a product. Each of these are site specific.
D-i.D Tag Brochure
Safety Fabrications Limited
"The D-i.D Tag provides a weather & UV resistant cover for safety critical information. The D-i.D Tag was developed specifically to meet the needs of the Fall protection, Guardrail, Ladder and Plant & Equipment Industries where regular inspection of equipment is critical to ensure its on-going safe operation.
The purpose of an Identity tag on a piece of work equipment is to tell the user at a glance if the equipment is ""in-test"". To do this the information has to be clearly visible and easy to read. A tag which is illegible, smudged or UV faded doe snot give the user the information he/she requires. The D-i.D tag protects the safety critical information."
D-marc demarcation barrier brochure
Safety Fabrications Limited
D-marc have developed a demarcation barrier system for flat roof tops. The D-marc can be used for the purpose of preventing access to hazards during regular rooftop maintenance or to demarcate a safe route of access across a roof. Wherever roof access is required designers are tasked with creating a safe means of access which can be identified by a demarcation system.
D-mac 105 is classed as a form of Collective protection in accordance with the HSE's hierarchy of risk management as WAHR 2005. The D-marc is a free standing solution which is wind tunnel tested to withstand windspeeds of 105mph as per BS 6399
D-marc Demarcation Barrier Installation guide
Safety Fabrications Limited
"D-marc have developed a demarcation barrier system for flat roof tops. The D-marc can be used for the purpose of preventing access to hazards during regular rooftop maintenance or to demarcate a safe route of access across a roof. Wherever roof access is required designers are tasked with creating a safe means of access which can be identified by a demarcation system.
D-mac 105 is classed as a form of Collective protection in accordance with the HSE's hierarchy of risk management as WAHR 2005. The D-marc is a free standing solution which is wind tunnel tested to withstand windspeeds of 105mph as per BS 6399"
D-marc Demarcation Operations and Maintenance Manual
Safety Fabrications Limited
"D-marc have developed a demarcation barrier system for flat roof tops. The D-marc can be used for the purpose of preventing access to hazards during regular rooftop maintenance or to demarcate a safe route of access across a roof. Wherever roof access is required designers are tasked with creating a safe means of access which can be identified by a demarcation system.
D-mac 105 is classed as a form of Collective protection in accordance with the HSE's hierarchy of risk management as WAHR 2005. The D-marc is a free standing solution which is wind tunnel tested to withstand windspeeds of 105mph as per BS 6399"
Fall Protection & Abseil Post BS 8610 Testing Certificate
Safety Fabrications Limited
SATRA Testing to BS 8610
Fall Protection Covers Test report
Safety Fabrications Limited
The Ascent Fall protection / Rooflight cover has been developed in an attempt to address one of the biggest causes of accident when it comes to working at height - a fall through a fragile surface. Rooflights when flush or inplane can be difficult to differentiate from the roof surface. The Ascent Fall protection Cover are a simple solution to provide protection to workers when there is presence of fragile surfaces. This Fragile surface protection is simply installed over the fall hazard creating a certified protective surface incase of an individual or an object falling.
Ascent fall protection & abseil post test report
Safety Fabrications Limited
Ascent fall protection and abseil post test report detailing both BS 8610 testing, resistance to water ingress, bi-metallic corrosion properties and applications
Ascent Fall Protection & Abseil post technical datasheet
Safety Fabrications Limited
Ascent Fall protection and abseil post technical datasheet details where the fall protection and abseil posts can be used, what the component parts are and how the products is tested.
Showing 1-22 of 22