AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
Verified by manufacturer 9 days ago
Airtrak MV150 Mansard Ventilator, pitch
Airtrak MV150 Mansard Ventilator, pitch
ISO 9001 Quality Management
Certificate type
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation into a flat roof where it falls out onto a pitched roof.
Application
- Suitable for use at the junction of a slated roof with metal, membrane or liquid roof coverings.
- E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
- FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.
Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.
Description
Range of mansard ventilators for slate and tile roofing is used to introduce ventilation at the point where the flat roof falls out onto a pitched roof. This is predominately used to ventilate the flat roof area but can also be used to provide ventilation to the head of the slate or tile roof at the same time.
Features and benefits:
- The stainless steel profile is covered by the flat roofing material or flashing.
- Combined with a AIRTRAK® LPS low pitch soaker to maintain the integrity of the detail as the pitch reduces, selection guide below.
- Can be combined with AIRTRAK® CF ClipFast clips where it is possible that the flashing might slip off the ventilator over time and the welt disengage from the lower edge.
- Supplied pre-bent to a specified angle.
Product selection guide:
- Tiled roof applications:
- 60-90° roof pitch: MV150.
- 45-59° roof pitch: MV200.
- 35-44° roof pitch: MV200 + LPS150.
- 30-34° roof pitch: MV225 + LPS150.
- Slated roof applications:
- 60-90° roof pitch: MV150.
- 45-59° roof pitch: MV200.
- 35-44° roof pitch: MV200 + LPS225.
- 25-34° roof pitch: MV225 + LPS225.
General information
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Shape | Rectangle |
Length | 1000 mm |
Width | 100 mm 180 mm 240 mm 275 mm |
Warranty description | Ten year |
Uniclass | |
CAWS | H62/47 Eaves H65/355 Ventilated eaves – separated grilles/ trays P10/110 Eaves roof ventilators for existing roofs |
Specification data - Strip ventilators
Ventilation opening | 25 mm continuous ventilation aperture. |
Colour | Stainless steel. |
Roof pitch | 150 mm. |
Grade | 304. |
Dimensions | 1000 x 180 mm. Guidance for specification option: Unit length x overall girth. |
Type | Standard. |
Airtrak LPS Low Pitch Soaker | Not required. Airtrak LPS150 Low pitch soaker for tiled roofs. Guidance for specification option: Not available with Airtrak MV150.
Airtrak LPS225 Low pitch soaker for slated roofs. Guidance for specification option: Not available with Airtrak MV150.
|
Airtrak CF ClipFast fixing clips | Not required. Airtrak CF ClipFast clips, stainless steel. Guidance for specification option: 70 x 60 mm, 0.6 mm thickness. Airtrak CF ClipFast clips, copper. Guidance for specification option: 70 x 60 mm, 0.5 mm thickness. Manufacturer guidanceFixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Recyclability | Recyclable at end of life |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 50 % |
Expected Life | 30 year |
Third party certifications
ISO 9001 Quality Management
Citation
Literature
AIRTRAK Roof Void Ventilation System 2020
Case studies
AIRTRAK™ - Coal Drops Yard
Clifton Cathedral
AIRTRAK™ - St Johns Chapel