Compare

Anhydrite Liquid Screed - Gypsol TS-20 - Free-Flowing and Self-Compacting Screed

Name: Anhydrite Liquid Screed - Gypsol TS-20 - Free-Flowing and Self-Compacting Screed
Brand: LKAB Minerals
SKU: e8rLk8YXERd3cFmAUe7TEt

Verified by manufacturer 5 months ago

LKAB Minerals

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Gypsol TS-20 is a free-flowing and self-compacting screed. Specially formulated to be laid at just 20 mm deep.

Jump to:

0800 622 6023 Website

Application

Gypsol TS-20; a multi-purpose thin screeding solution because of its particular formulation, TS-20 liquid screed can be laid either bonded or unbonded over a polythene slip membrane. The product is in both commercial and domestic construction projects. Customers use this screed to produce a smooth, flat and level floor to form the sub-base for subsequent floor coverings for internal floors.

Constructions, where the screed would typically be found, are:

Houses.
Apartment schemes.
Schools.
Hospitals.
Offices.
Shops.

LKAB Mineral customers are specially trained screeders that use specialized equipment to place the screed. The Gypsol TS-20 offers a cost-effective method of leveling an existing floor slab, notably because the product has high strength and high resistance to cracking. As with all other Gypsol liquid screeds, TS-20 is a highly environmentally friendly alternative to cement-based screeds. Therefore, use this as a heat transfer medium for thin section underfloor heating systems, whether electric or warm water.

Description

Gypsol TS-20 can be placed at a depth of just 20 mm in either bonded or unbonded constructions.

Gypsol Binder is an integral component of Gypsol TS-20, a uniquely formulated liquid screed designed to offer a strong and durable thin topping to a solid substrate. Gypsol TS-20 can be laid either bonded or unbonded over a polythene membrane to provide a highly versatile design solution. Gypsol TS-20 can be used in many applications as a cost-effective alternative to bagged screeds to renovate existing rough concrete floors, level of pre-cast concrete planks, and where floor-to-ceiling heights is restricted. Gypsol TS-20 can, in some circumstances, be used in conjunction with low-profile underfloor heating systems subject to suitability.

Features and benefits:

Rapid application.
Vast coverage: 50 m² per m³.
Thin Screed sections: 20 mm Unbonded, 20 mm Bonded.
Fast drying: Drying rate more than 1 mm per day*.
No reinforcement nor fibres required.
No curing agents required.
Rapid return to service of work areas.
Foot traffic after just 48 hours.
Full loading after only seven days.
Assured high strength: Minimum Ca-C30 – F5.
Reduced requirement for Movement Joints Max 20 m length / Max aspect ratio 6:1.

*Independently tested and based on the fixed depth at 20˚C and 60% RH. Complete test data is available on request.

General information

Color	White
Material	Anhydrite binder Guidance for specification option: Gypsol Screed.
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	20 mm

Uniclass	Pr_35_31_06_78 Self-smoothing levelling screed mixesPrimary
CAWS	M12/35 Coated resin flooring M12/120 Resin flooring M12/12 Resin flooring M12/110 Resin flooring M12/10 Resin flooring M10/160 Proprietary self smoothing levelling screeds

Specification data - Self-smoothing levelling screed mixes

Binder	Gypsol binder.
Reinforcement	Not required.

Membrane	Polythene membrane.
Appearance	Off white fluid mortar.
Density	2000 kg/m³ (dry); 2200 kg/m³ (wet).
Strength	C30—F5. Manufacturer guidance Minimum.
Required Flow	To EN 13454-2, 230—270 mm.
Reaction to fire	Class A1fl Non-Combustible.
Working time	2 hours. Guidance for specification option: Place and finish within 2 hours of batching. Finish within 1 hour of placing.
Drying time	24—48 hours (foot traffic); 7 days (loading). Guidance for specification option: Gypsol TS-20 can be force dried after 7 days. Manufacturer guidance @20°C/60% RH. In excess of 1 mm /day.
Depth	20 mm. Guidance for specification option: Gypsol TS 20 has been independently tested for suitability to be laid unbonded at 20 mm depth. Prepare the substrate in accordance with BS 8204:7:2003 using a gritted two coat epoxy resin DPM or similar. Manufacturer guidance Minimum.
ThermalConductivity	Up to 2.3 w/mK.

Sustainability data

Country of product manufacture	United Kingdom
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	3.5 kg CO₂ eq/m² Guidance for specification option: Minimum: 3 kg/m². Manufacturer guidance Maximum.