NBS Source
I'm a manufacturer

Fastwarm® FastTile+ - XPS Underfloor Heating Insulation Board

Verified by manufacturer 5 days ago

Fastwarm Underfloor Heating

High compressive strength 200 kpa extruded polystyrene (XPS) underfloor heating insulation board for low profile systems.

Jump to:
+44 (0)1268 744479 Website

Application

  • Suitable for ultra low profile retro fit installations.
  • Suitable for use with all floor finishes.

Description

A high compressive strength 200 kpa XPS underfloor heating insulation board for low profile systems. It has durable cement coatings on either face that are suitable for the direct application of tiles or covering with floor leveller and covering with all suitable floor finishes.


Features and benefits:

  • Provides ready-made pipe securing and spacing using pre-grooved insulated boards.
  • High compressive strength insulation.
  • Tile or level over primed board to accommodate all floor coverings.
  • Typical outputs up to up to 76 w/m².
  • 600 x 1200 x 20 mm (for 16 mm pipe).

General information

Color

Grey

Purple

Finish

Grooved

Material

High density extruded polystyrene (XPS)

Shape

Rectangle

Length

1200 mm

Width

600 mm

Height

20 mm

Warranty description

Lifetime

Uniclass

Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary

CAWS

M40/5 Tiling to

M40/110 Tiling to

M40/470 Intermediate substrate

M40/27 Intermediate substrate

Specification data - Extruded polystyrene (XPS) boards

Standard

To BS EN 13164.

Fire performance

To EN 13501-1, Class E.

Compressive strength (minimum) at 10% compression

To EN 826, >20 N/mm².

Thermal conductivity (maximum)

To EN 13164, 0.034 W/(m-K).

Thickness

20 mm.

Face size (length x width)

1200 x 600 mm.

Facing

Cementitious.

Edges

Square.

Material density

To EN 1602, >30 kg/m³.

Dimensional stability

To EN 1604, <5%.

Manufacturer guidance

At 70°C and 90°C relative humidity.

Deformation capability

To EN 1605, <5%.

Manufacturer guidance

Under 40 kPa load and 70°C temperature.

Water absorption

To EN 12087, <1%.

Manufacturer guidance

On long term immersion.

Linear thermal expansion coefficient

0.07 mm/(m-K).

Working temperature

-50°C to +75°C.

Sustainability data

Material

High density extruded polystyrene (XPS)

Literature

FastTile+ Data Sheet

FastTile+ Data Sheet

Similar products from Fastwarm Underfloor Heating

Fastwarm®  InJoist - Foil Faced in Joist Batten Panels

Fastwarm® InJoist - Foil Faced in Joist Batten Panels

Fastwarm® DUO - Dual Purpose Overlay Board

Fastwarm® DUO - Dual Purpose Overlay Board

Fastwarm® Tile Backer Insulation Boards

Fastwarm® Tile Backer Insulation Boards

Fastwarm® XPS Insulation Boards

Fastwarm® XPS Insulation Boards