FlameOUT® Breathe - Class B-s1,d0 Flame Retardant Breather Membrane - Breather Membranes

FlameOUT® Breathe is suitable for wall and pitched roof installations in safety critical structures over 18 m in England and 11 m in Scotland.

Storage and handling:

Store membrane rolls horizontally in a cool, dry sheltered store. Handle the material with care and ensure that the membrane is not creased or folded.

Installation:

• Secure to the supporting structure using stainless steel staples.
• It is recommended that the membrane is installed vertically.
• For corners, loosely wrap the membrane around the corner and seal the recommended overlap with FlameOUT tape or fix with staples.

Bonding to surfaces:

• Make sure that surfaces are clean and free from dust and grease.
• Stainless steel staples can be used to fix the membrane to timber studs.
• Double-sided FlameOUT Tape can be used to fix to wood, foams, metal, and plastics. Test any surface prior to installation. It is not advisable to attach to insulation due to the unstable surface.
• FlameOUT Breathe is Class B-s1,d0 when free hanging or directly installed on a supporting structure with a flame-retardant classification of A1 or A2.
• Protect the membrane from UV exposure.
• Cover and finish the installation within a maximum of 3 months.

Tape:

• FlameOUT Tape should be used to seal 100 mm overlaps.
• A single continuous row of the double-sided tape should be laid to create a waterproof seal within the 100 mm overlap.
• If the membrane is installed vertically then overlaps should be 150 mm.
• Use a hand-held roller to aid adhesion.

Repairs:

Small punctures in the membrane after installation can be repaired with a patch of FlameOUT Breathe large enough to extend approx 150 mm beyond the penetration. Adhere using FlameOUT Tape.