Flowcoat SF41 LE System - Epoxy Resin Coating
Verified by manufacturer 8 months ago
Pigmented, high-performance, solvent-free epoxy coating with enhanced UV resistance and low VOC emissions.
Application
Suitable for use as a line marker in demarcation areas and may also be used for internal deck car park topcoats.
Suitable for use in areas such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required.
IMPORTANT: All specification information must be checked against the individual site requirements. Flowcrete advises that specifications are confirmed with their technical experts.
Description
A solvent-free, chemical-resistant, epoxy resin coating that can deliver an anti-slip profile by inclusion of aggregates between coats.
The product is hard wearing against sustained vehicle traffic, as well as chemical and abrasion resistant.
Features and benefits:
- M1 Certified.
- CE Marked.
- Low VOC content and emissions.
- Chemical-resistant.
- Decorative.
- Slip-resistant.
- Wear-resistant.
- Hygienic.
- Nonylphenol free.
- Seamless.
- FeRFA Type 3.
General information
Color | Blue Green Grey Red Beige |
Finish | Gloss |
Material | Resin |
Height | 0.5 mm |
Warranty description | Manufacturer guidanceTwo to five years. |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Resin flooring systems
Substrate | |
Testing | Moisture content of substrates dry to 83% RH. |
Preparation | Preparation of substrate. |
Primer | Not required.Flowprime LE100.Guidance for specification option: at 0.30 kg/m². (required for weak substrates). |
Resin flooring | Flowcoat SF41 LE.Guidance for specification option: (density ~1.44 kg/l). First Coat at 0.3 kg/m². Second Coat at 0.3 kg/m². Coverage rates will vary with surface profile and temperature. |
Certification | CE Marked. |
Fire resistance | To EN 13501-1, Bfl-s1. |
Wear resistance | To EN 13892-4, AR0.5 (<50 µm). |
Bond strength | To EN 13892-8, B2.0 (≥2 MPa). |
Shore Hardness - D | To EN ISO 7619-1, D ≈ 80. |
Impact resistance | To EN ISO 6272, IR5 (5 Nm). |
Temperature resistance | Tolerant of sustained temperature up to 50°C. |
VOC emissions | Indoor Air Comfort GOLD: Pass. Guidance for specification option: M1: Pass | AGB/AgBB: Pass | BREEAM Int.: Exemplary Level. |
Slip resistance | To EN 13036-4, >40 (dry); >15 (wet). Guidance for specification option: Low slip potential (dry); high slip potential (wet). |
Cure time | Light traffic: 24 hours. Guidance for specification option: These figures are typical properties achieved in laboratory tests at 20°C. |
Finish options | Gloss. |
Colour options | Beige 326. Dark Grey 281. Forest Green 754. Goosewing Grey 222. Light Grey 232. |
Thickness | 0.5 mm. |