Verified by manufacturer over a year ago
HACCP International Product Compliance Certification
Certificate type
Four-component, slip-resistant, solvent-free, polyurethane concrete screed.
Particularly suitable for wet processing zones subject to high volumes of foot and wheeled traffic. It has a coved application.
IMPORTANT: All specification information must be checked against the individual site requirements. Flowcrete advises that specifications are confirmed with their technical experts.
A four-component, slip-resistant, solvent-free, polyurethane concrete screed product containing Polygiene, an antimicrobial additive. The product has a fine textured coloured floor finish with a speckled effect on the surface.
Features and benefits:
Color | Blue Cream Green Grey Red |
Finish | Matt |
Material | Polyurethane |
Height | 6 mm 9 mm |
Warranty description | Ten year |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Substrate | |
Testing | Moisture content of substrates dry to 75% RH. |
Preparation | Shot blast. |
Levelling screed | Isopol SBR if required. |
Primer | Flowprime or Hydraseal DPM.Guidance for specification option: (where DPM required). Flowfresh Primer (high heat required) with 1–2 mm silica sand scatter. |
Resin flooring | Flowfresh HF (FeRFA Type 8). |
Bond strength | >2.5 N/mm². |
Certification | CE Marked. |
Coefficient of thermal expansion | 3.74 x 10^(-5) mm/mm°C. |
Colour options | Ochre. Cream. Mustard. Red. Dark Green. |
CompressiveStrength | >50 N/mm². |
Cure time | Light traffic: 24 hours, Full traffic: 2 days, Full chemical cure: 7 days. |
Flexural strength | 20 N/mm². |
Impact resistance | 15 Nm. |
Slip resistance | Dry >40 low slip potential. |
TensileStrength | 10 N/mm². |
Thickness options | 6 mm. 9 mm. |
Uses | Wet processing zones, food preparation areas, chemical processing plants. |
Vapour Permeability | 3 g/m²/mm/24 hours at 9 mm thickness. |
Water permeability | Nil. Guidance for specification option: Karsten test (impermeable). |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 3 | |
- | 2 |