GreenCoat® PLX Colour Coated Steel Fully Supported Traditional Standing Seam Roofing and Facade Cladding, With/Without Solar - Standing Seam Roof

A colour-coated steel standing seam system with traditional detailing, giving an aesthetically pleasing finish whilst avoiding the industrial finishes found in contemporary standing seam systems.

Can be used in different widths in both roofing and facade cladding applications. Can also be employed to clad small surfaces such as dormers, fascias or gables.

It is available in two finishes, Pro is a smooth finish and Pural offers a subtle dappled effect.

Use the PRO finish only when using thin film solar photovoltaics.

Features and benefits:

• Manufactured from a specialist sustainable colour coated steel made with rapeseed coating.
• Material - A1 fire rated.
• Seams are available in 25 mm or 38 mm formats.
• The system can be provided as a complete roof kit including all flashing, matching rainwater products and ancillaries.
• Solar specification also available for use with thin film solar photovoltaics. In this instance the PRO version must be used. Contact Metal Solutions for more information.

Protective Finishes:

Greencoat steel is protected with a zinc coating before being finished with the final BT finish.

The zinc coating (Z, 100 – 350 g/m2) is lead free and has a

minimum zinc content of 99 %. This protects the steel from

corrosion in two ways. It is a protective layer keeping oxygen and water away from the steel, but it also acts as a cathodic protection. This means that at cut edges or in case of damages through the zinc coating, the zinc will sacrifice itself and react to form protective compounds and block further corrosion processes.

Substructure:

Suitable substructure materials:

• Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
• Ventilated oriented strand board OSB3.
• Composite panel.
• Rigid insulation.
• Profiled metal deck.

Underlay:

ISO-Mat Pro® underlay is recommended for cold roof applications.

ISO-Mat Metal® underlay is recommended for warm roof applications.

Available from:

roofing-tool.com

Clips:

• Fixed: 25 mm seams: SM-EFK-25; 38 mm seams: SM-EFK-38.
• Sliding: 25 mm seams: SM-EFE-25; 38 mm seams: SM-EFE-38.
• Flashing clips: SM-ELH-27.
• For fixing to rigid insulation: Thermoseam warm room clip for metal roofing.

Available from:

roofing-tools.com

Installation:

Contact Metal Solutions for a list of Approved Installers by postcode

Email

gaynor@metalsolutions.uk.com