Verified by manufacturer 7 months ago
BBA Agrément Certificate
Certificate type
An open cell impregnated expanding foam tape that is capable of maintaining a weather tight seal against the most severe combination of wind and rain where differential movement occurs.
Applied to the tolerance gap between the window head and sill in timber framed constructions that are subject to differential movement.
Store below 10°C in warm weather to prevent premature expansion. TP450 is inserted into the joint. Do not stretch whilst applying. Apply direct from the roll.
Soft and flexible open-cell polyurethane foam impregnated with an acrylic-based UV-stabilized resin. The resin is water repellant and contains a fire retardant. The product is supplied pre-compressed on rolls in engineered width and sealing ranges with a self-adhesive on one side to aid installation and initial location. It is weather tight against the most severe combination of wind and rain. TP450 TimberMax is applied to the head and cill detail in Timberframe Constructions that are subject to differential movement. Standard illmod TP600 or Compriband e is applied to the jambs.
Features and benefits:
For Technical Data Sheets and Safety Data Sheets, please refer to the illbruck website Download Centre.
Material | Polyurethane |
Width | 14 mm 15 mm 25 mm 40 mm 50 mm |
Warranty description | Manufacturer guidanceAny product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge. |
Uniclass | |
CAWS | L20/820 Sealant joints L20/80 Sealant joints L10/810 Sealant joints L10/75 Sealant joints |
Product range |
Third-party certification | British Board of Agrément: Certificate: 12/4891 As part of the i3 System, product sheet 5. |
Colour | Anthracite. |
Execution | Manufacturer guidanceIn strict accordance with the manufacturers Technical Data Sheet. Illmod TP450 must be seated between two parallel solid surfaces. The joint depth must be at least equal to the width of tape selected. Do not exceed the stated sealing tolerance for any given size. Consideration for the residual thickness of the tape must be given when using in expansion /deflection joints, the tape cannot be compressed below its' precompressed state. |
Materials | Polyurethane cellular foam, impregnated with a modified flame retardant artificial resin. |
Reaction to fire | To DIN 4102 B1, self-extinguishing P-NDS 04-229. |
Weathering | To DIN 53387, Requirements of the DIN Standard are met; Resistance to driving rain: to BS EN 86 and DIN 52453, Requirements met up to the described joint sizes, providing a minimum of 450 Pa (independently supervised by MPA Hannover). |
ThermalConductivity | To DIN 52612: λ 10 <0.055 W/mK. |
Compatibility | To DIN 52453, No signs of corrosion were observed on iron, zinc, steel, galvanized steel, aluminium, and copper. No adverse effects with concrete, aerated concrete, brick, some stones, polyvinyl chloride (PVC), Plexiglas or timber. |
UV resistance | Very good. |
Service temperature | -30 to +90°C. |
Storage | Store rolls horizontally between +1°c and +25°C in dry conditions and away from direct sunlight. Re-seal packaging between use to prevent premature expansion during storage. |
Shelf life | 24 months when stored in its orginal unopened containers. |
Accessories | Cutting shears. Skewer. Putty knife. |