illmod TP654 Trio 1050 - Sealing tape
Verified by manufacturer 7 months ago
illmod TP654 Trio 1050 is an all in one window and door perimeter sealing solution.
Application
Traditional new build and existing cavity walls, solid masonry walls, some types of framed and sheathed walls or pre-cast concrete walls where the window or door frames are inset into the structural opening and not projecting from a backing wall.
Cavity wall reveals must be closed off with a proprietary thermal cavity closer, blockwork or similar return to the outer leaf. Existing cavity and solid masonry wall reveals may need to be made good. Damaged or excessively undulating masonry should be levelled off with sand and cement render to provide a flat as possible surface. illmod TP654 Trio 1050 is applied directly to the head an jamb of the frame immediately prior to the final installation of the window or door. The cill section of illmod TP654 Trio 1050 is applied to the substrate of the structural opening and bonded with illbruck SP525.
Description
illmod TP654 Trio 1050 is a three layer pre-compressed multi-functional window and door sealing tape based on two new technologies incorporating a proprietary airtight membrane layer running through the entire width of its core. Certified Passiv-haus levels of airtightness can be achieved.
Features and benefits:
- Flexible.
- Airtight.
- Vapour permeable.
- Driving rain resistance to 1050 Pa.
- Thermal and acoustic insulation.
- Emission class of EC1+.
For Technical Data Sheets and Safety Data Sheets, please refer to the illbruck website Download Centre.
General information
Color | Grey |
Material | Polyurethane |
Length | 8000 mm 11500 mm |
Width | 58 mm 66 mm 77 mm 88 mm |
Warranty description | Manufacturer guidanceAny product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge. |
Uniclass | |
CAWS | L20/820 Sealant joints L20/80 Sealant joints L10/810 Sealant joints L10/75 Sealant joints |
Product range |
Specification data - Structural sealant glazing weather sealants
Third-party certification | 11699/23.5.07 EMICODE- EC-1. |
Colour | Grey outer lamination, anthracite inner core layer. |
Execution | Manufacturer guidanceIn strict accordance with the manufacturers Technical Data Sheet and method Statements. Illmod TP654 Trio 1050 must be seated between two parallel solid surfaces. The joint depth must be at least equal to the width of tape selected. Do not exceed the stated sealing tolerance for any given size. Consideration for the residual thickness of the tape must be given when using in expansion /deflection joints, the tape cannot be compressed below its' precompressed state. |
Materials | Open cell impregnated polyurethane foam tape, polyethylene air membrane. |
Classification | MF1 Test Method DIN 18542. |
Reaction to fire | To DIN 4102, Class B1 self extinguishing. |
Resistance | To EN1027, 1050 Pa for sealing ranges 6-15 mm and 10-25 mm. |
Air permeability | Test Method to DIN EN 12114. Guidance for specification option:
|
ThermalConductivity | Test method to DIN 52612. Guidance for specification option:
|
Acoustic insulation | To DIN ISO 717-1, 60 dB. |
Water vapour transmission | Test Method to DIN ISO 12572. Guidance for specification option: α, sd-value 0.5m Variable (Vapour resistance / equivalent thickness layer). |
Temperature resistance | -30°C to +80°C. |
UV resistance | Given, test method DIN ISO 18542 sealing tapes for outside walls. |
Accessories | Tape measure. Work bench. Cutting shears. 600 ml sealant dispensing gun. Sealant Adhesive illbruck SP525. |