Interchar® 2090 - Acrylic Intumescent
Verified by manufacturer 5 months ago
A single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to provide fire protection to structural steelwork.
Application
- To provide up to two hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
- Suitable for both off-site and on-site application due to its ease of use, fast drying and handling properties.
- Can be used over a wide range of approved priming systems.
Description
Thin film Interchar 2090 provides up to two hours fire protection to structural steelwork, while maintaining architectural aesthetics. Interchar 2090 is a single component, low VOC intumescent coating suitable for onsite and offsite application.
Features and benefits:
- Independently tested at accredited laboratories to BS 476 Parts 20-21, AS 1530.4-2014 and AS 4100, and third party assessed and certified.
- Matt white appearance.
- Airless spray or brush applied.
General information
Color | White |
Finish | Matt |
Material | Acrylic Solvent-borne |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M61/140 On-site overcoating to existing steel M61/170 Off-site coating to galvanized steel M61/160 Off-site coating to primed steel M61/150 Off-site coating to unprimed steel M61/115 On-site coating to galvanized steel M61/110 On-site coating to primed steel M61/120 On-site coating to existing steel |
Specification data - Intumescent protective coatings
Composition | Solvent-based. |
Colour | White. |
Gloss level | Matt. |
Volume solids | 75% ± 3%. Guidance for specification option: Measured according to ISO 3233 and ICF Method. |
Thickness | 300–1500 µm (dry); 400–2000 µm (wet). Guidance for specification option: Can be applied up to 1.5 mm DFT in a single coat. |
Coverage | 1 m²/litre at 750 µm. Manufacturer guidanceTheoretical coverage. |
VOC content | 286 g/lt. Manufacturer guidanceEPA method. |
Flash point | 4°C. |