NBS Source
I'm a manufacturer
Compare variants

Junior 80 B Pocket (Sliding Door Hardware)

Verified by manufacturer 3 months ago

Junior 80 B Pocket (25074)

Hawa Sliding Solutions AG Variant:
Third party certifications:
  • EPD

    EPD

    Certificate type

Sliding hardware for wall pocket solutions, for use with single wooden doors with a weight up to 80 kg.

Jump to:
+41 44 787 17 17 Website

Application

Suitable for low headroom applications and for use by people of all abilities, including in the following locations:

  • Retirement homes.
  • Care homes.
  • Shopping centres.
  • Schools.
  • Public buildings.
  • Family homes/ apartment complexes.
  • Hotels.

Description

Sliding hardware for wall pocket solutions, for use with single wooden doors with a weight up to 80 kg, an opening width between 70–1500 mm, and a thickness between 40–50 mm.


Features and benefits:

  • Suitable for use in low headroom applications.
  • Helps to optimize room space.
  • Fitting and removing the running track is possible due to the provision of a retainer profile with a bayonet lock.
  • All components can be replaced or extended, dependent on project requirements.
  • Easy insertion of the door into the pocket: The pivot point of the suspension unit is at the end of the door on the pocket side. The suspension unit on the pocket side can be pushed towards the middle of the door during installation.
  • Easy and efficient height adjustment when the door is installed.
  • The suspension unit has been designed specifically for pocket installation, and the clip-on cover is suitable for concealed mounting.
  • The separating layer between the running track and retainer profile reduces vibration transmission (structure-borne noise).
  • The end position can be adjusted via the suspension trolley in the pocket when the door is open.
  • Includes a laterally adjustable rattle-proof floor-mounted guide and a rattle-proof, removable top track assembly.
  • Door push-out can be integrated in the running track.
  • Vertically adjustable (±3 mm), with integrated anti-twist protection. Horizontally adjustable (± 8 mm) in the bayonet.
  • Assembly set offers a high level of protection from running track contamination during the construction phase.
  • The rattle-proof bayonet lock with entry ramp makes it easier to install the running track in the retainer profile.


Components:

Quantities of each component will vary dependent on variant specified (consult manufacturer for details).

  • Two-wheeled trolley M10, with plastic wheels.
  • Top fixed suspension with plate and hanger bolt M10 (25074, two supplied) and 20 mm longer than standard bolt for 26014 only (two supplied) – allows the running track to be covered from below with removable ceiling elements.
  • Track stop with adjustable retaining force.
  • Screw-on rubber door stop.
  • Rattle proof guide for screw mounting to floor with groove width 10 mm, black plastic 35 mm long, laterally adjustable).
  • Suspension assembly locking wrench.

General information

Color

Grey

Finish

Anodized

Material

Aluminium

Shape

Rectangle

Warranty description

Two year

Uniclass

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Door track and running gear

P21/350 Door track and running gear

Specification data - Door track and running gear

Standard

To EN 1527.

Third-party certification

TÜV Rheinland LGA Products GmbH, Nürnberg, Germany.

Classification grades (minimum)

-

Durability

6.

Door mass

2.

Initial friction

3.

Form

Aluminium, plain anodized, pre-drilled, wall pocket running track.

Guidance for specification option:

Hole positions vary, consult manufacturer for details.

Running track

1400 mm.

1600 mm.

1800 mm.

2000 mm.

2200 mm.

Show more

Manufacturer guidance

The length of the running track must not exceed the diagonal clearance.

Closing mechanism

Not required.

SoftMove 80.

Accessories/ Other requirements

Not required.

Clip-on cover, 2000 mm.

Guidance for specification option:

  • Aluminium, plain anodized.
  • For concealed attachment of the lintel panelling up to a material thickness of 40 mm.

Set for mountable and demountable running track, 2000 mm.

Set for mountable and demountable running track, 2500 mm.

Set for mountable and demountable running track, 3000 mm.

Show more

Manufacturer guidance

Spares are also available, consult manufacturer for details.

Components

Standard hanger bolt.

Sustainability data

Contains Red List materials

No

Country of material origin

Switzerland

Country of product manufacture

Switzerland

Recyclability

Yes

Third party certifications

BIM objects

Platform Compatible Version
Revit
-

1

IFC
-

1

Third party certifications

EPD

EPD

Hawa EPD Sliding door gear EN

Literature

CAT_EN_Hawa_Junior_80_B_Pocket

CAT_EN_Hawa_Junior_80_B_Pocket

Similar products from Hawa Sliding Solutions AG

Aperto 60 H (Sliding Wall Partition Gear Hardware)

Aperto 60 H (Sliding Wall Partition Gear Hardware)

Banio 40 GF (Shower Enclosure Hardware)

Banio 40 GF (Shower Enclosure Hardware)

Centerfold 80 GV (Folding Sliding Wall Hardware)

Centerfold 80 GV (Folding Sliding Wall Hardware)

Centerfold 80 H (Folding Sliding Wall Hardware)

Centerfold 80 H (Folding Sliding Wall Hardware)

Concepta 25/ 30/ 40/ 50 (Pivot Sliding Furniture Hardware)

Concepta 25/ 30/ 40/ 50 (Pivot Sliding Furniture Hardware)

Concepta III 25 Pull (Pivot Sliding Furniture Hardware)

Concepta III 25 Pull (Pivot Sliding Furniture Hardware)

Concepta III 25 Push (Pivot Sliding Furniture Hardware)

Concepta III 25 Push (Pivot Sliding Furniture Hardware)

Concepta III 35 Pull (Pivot Sliding Furniture Hardware)

Concepta III 35 Pull (Pivot Sliding Furniture Hardware)

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Folding Concepta 25 (Pivot Sliding Furniture Hardware)

Folding Concepta 25 (Pivot Sliding Furniture Hardware)