LicataTherm Bio

Thermal performance.

Approved proprietary biocidal wash. Surfaces must be sound, free from loose material and clean.

Guidance for specification option:

Where an adhesive system is used, the surfaces must be sound, free from loose material and clean.

Where additional mechanical fixings are to be used, the substrate must be capable of sustaining the design loads.

Existing substrates that show visible signs of algae and mold will require treating with an approved proprietary biocidal wash prior to any render works.

Steel frame.

Timber frame.

Not required.

Guidance for specification option:

 For brick and blockwork substrates. 

A1 Fibre Cement Board.

Guidance for specification option:

For steel and timber framed substrates.

MW Dual Density 036.

Guidance for specification option:

Dual density mineral wool slabs available in sizes up to 1200 x 600 mm and in a range of thicknesses from 40–240 mm, with nominal densities of 160/100 kg/m³ (outer/inner layer), a minimum compressive strength of 10 kPa and a tensile resistance perpendicular to the faces of 10 kPa. Slabs are manufactured to comply with BS EN 13162:2012. 

Raso Top Bio.

Guidance for specification option:

A biocompatible skim coating/adhesive, certified as GP mortar in accordance with the UNI EN 998-1 standard, specifically designed for applications requiring extremely high breathability. 

1000 x 200 mm rock fibre panels.

Fire breaks.

Adhesively fixed.

Licata meshed corner beads.

Licata PVC stop beads.

Low modulus silicone mastic.

Compression band.

Backing strips.

Joint filler.

LicataTherm Ret01-1160, glass fibre mesh.

Guidance for specification option:

1 m wide mesh (3.5 x 4.5 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 145 g/m².

LicataTherm Tolantext 41-112, glass fibre mesh.

Guidance for specification option:

1 m wide mesh (3.5 x 4.7 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 150 g/m².

160g/m2.

Adhesively fixed.

Primer coat.

Isolante LG Primer.

Aggrappatne LG Primer.

Siloxan color finishing coat.

Guidance for specification option:

Siloxan Color is a coating made with water-dispersed siloxane binder paste, ready for use and which can be pigmented. Ready to use paste, silicone-based finishing coat with thickness regulated by the particle size, Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements.

LicataSil silicate/ mineral top coat.

Guidance for specification option:

LicataSil is a mineral coating made with water-dispersed potassium silicate paste, ready for use and which can be pigmented. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements.

Acrylic brick slips.

Guidance for specification option:

Acrylic Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic Brickslips are a suitable finish for external wall insulation systems avaible in 3 mm size.

Clay brick slips.

Guidance for specification option:

Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application., Avaible in 10mm, 15mm, 20mm sizes; insert requirements.

Resin multi-colour.

Guidance for specification option:

Multi Colour – Wall Coating in putty, ready to use, with an acrylic binder base and grains of coloured ceramic, high water repellency and excellent abrasion resistance.

Licata movement beads.

APU with mesh 9 mm.

Compression band.

Guidance for specification option:

Insert requirements e.g.:

• Preparation work to existing substrate.
• Installing insulation boards.
• Installing fire barriers and fire-stopping.
• Installing movement joints.
• Fixing beads and trims.
• Installing render carrier or reinforcement.
• Applying render.
• Applied decorative finish – dragged texture.

Inspection of completed installation.