NBS Source
I'm a manufacturer
Compare variants

Liquid Vapour Barrier System - Koster VAPlite

Verified by manufacturer 5 months ago

Koster VAPlite system for basements, with Koster NB1 Grey

Koster Aquatecnic Ltd Variant:
Third party certifications:
  • ISO 9001 Quality Management

    Certificate type

  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • DoP

    DoP

    Certificate type

  • EPD

    EPD

    Certificate type

Internal waterproofing, vapour control, high strength screed system, permanently prevents passage of liquid water and controls vapour transmission through concrete slabs, all within a 10 mm build-up.

Jump to:
+44 (0)1387 270252 Website

Application

For application to unsealed interior concrete floor slabs such as basement rooms, retail space, private homes and offices and other construction which are exposed to moisture from the underside due to faulty or missing damp proof membrane (DPM).

 

For application in fast-track construction where there is vapour barrier (DPM) installed under the floor slab, but application of the floor build-up is required before the concrete has completely dried out and the RH readings for the floor are above those advised for the floor finish. 

 

During drying of concrete high alkalinity can become concentrated towards the top surface of the concrete, causing damage to some resin floors and adhesives. The VAPlite System is resistant to alkalinity (pH 13–14) and serves as a barrier protecting the floor build-up from the effects of high alkalinity.

 

In situations where a vapour open flooring is to be used, but the DPM is missing, damaged or status unknown, the VAPLite system, will create an effective vapour barrier, preventing elevated humidity levels within the room (a particular issue for basement rooms).

 

VAPLite is intended for basements, lightly trafficked areas (foot traffic only) and smaller areas where shotblasting is not practical. All components of the system must be used as directed including the Koster SL Premium screed. For larger areas, areas subject to vehicular traffic, and areas requiring direct application of the finished floor (without levelling screed) the Koster VAP 2000 I System (covered by a separate NBS) is recommended by the manufacturer and shot blasting (or Koster approved equivalent) will be required.  

Description

The Koster VAPlite system has been developed as a complete floor protection system for use in both basement areas subjected to hydrostatic pressure, and ground level or suspended floor slabs subject to short term or long term elevated relative humidity (RH) values. The Koster VAPlite system can provide a BBA approved negative side waterproofing, a quantifiable vapour barrier and a high strength self-levelling screed, all within a 10 mm build-up.  


Controlling the water vapour within the floor slab will:

  • Prevent osmotic blistering or damage due to vapour drive for impermeable floor finishes such as resin or vinyl.
  • Prevent re-emulsification of adhesives due to high moisture levels within the build-up.
  • Protect moisture sensitive flooring such as wooden floors.
  • Allow application of floor finishes in fast-track projects, where the RH value of the slab is too high for the intended flooring.

 

The VAPlite System includes the following steps:


Base coat:

For floor slabs subject to hydrostatic pressure: Polysil TG500 primer (impregnation) followed by 2 coats of Koster NB1 Grey, BBA approved negative side, crystallising, sealing slurry. For ground level or suspended floor slabs: Koster KB Pox IN, ultra-low viscosity epoxy impregnation to fill open pores within the concrete.

 

Vapour control:

All slabs: After 7 days, apply a single coat of Koster VAP I 2000.

 

Screed primer:

All slabs: After 24 hours apply one coat of VAP 06 Primer (for non-absorbent surfaces).

 

Screed:

All slabs: Koster SL Premium, high strength, self-levelling screed is applied between 8 mm and 15 mm to provide a level, hard wearing surface to receive any flooring finish and protect the waterproofing and vapour control layers below.


System build-up:


Basement:

  1. Köster Polysil TG500 (impregnation).
  2. Köster NB1 Grey (approximately 2 mm).
  3. Köster VAP I 2000 (adds approximately 0.2 mm).
  4. Köster VAP I 06 (approximately 100 microns).
  5. Köster SL Premium (8–15 mm as required).
  6. Floor covering/ coating (as required).

Above-ground:

  1. Köster KB Pox IN (impregnation).
  2. Köster VAP I 2000 (adds approximately 0.5 mm).
  3. Köster VAP I 06 (approximately 100 microns).
  4. Köster SL Premium (8–15 mm as required).
  5. Floor covering/ coating (as required).

Features and benefits:

  • Thin layer build-up, 8–15 mm, making the system suitable for new and existing areas.
  • Suitable for concrete slabs with no underside DPM (damp proof membrane) or WPM (waterproof membrane).
  • Permanently withstands an elevated moisture level in the concrete of up to 100% relative humidity (RH).
  • Resistant to a permanently aggressive environment with pH values up to 14.
  • Suitable for all flooring types, even moisture sensitive finishes, in basement areas.

Please contact the Koster Technical Team for more information on the system or assistance with specification - technical @kosteruk.com.

General information

Color

Grey

Finish

Smooth

Material

Mineral

Guidance for specification option:

Mineral cementitious slurry.

Epoxy resin

Guidance for specification option:

100% solids epoxy resin.

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Guidance for specification option:

Manufacturer’s warranty.

Uniclass

Ss_32_20_30_15 Cold-applied liquid floor damp-proofing systemsPrimary
Ss_32_80_03_20 Crystallization-active cementitious mortar slurry tanking systems

CAWS

C42/345 Protective coatings for concrete

M10/130 Proprietary quick drying levelling screeds

M40/460 Smoothing underlayment

M50/460 Smoothing/ levelling underlayment compound

M10/7 Proprietary quick drying levelling screeds

Product range

Flooring Systems
Internal Basement Waterproofing Systems

Specification data - Cold-applied liquid floor damp-proofing systems

Damp proof coatings

-

Coating materials

Cementitious slurry, epoxy based resin, polymer modified cementitious screed.

Manufacturer guidance

/ Composition:

Repair and restoration

Not required.

Guidance for specification option:

No cracks.

Manufacturer guidance

Crack Repair:

Primary layer

Koster Polysil TG500.

Guidance for specification option:

Primer for below ground applications prior to application of sealing slurry.


  • A thin fluid based on a polymer and silicate combination which can be used as a deep penetrating primer or as a liquid hardener.
  • Strengthens and protects mineral substrates and reduces their absorbency.
  • Decreases salt efflorescence and leaching out of free lime from new concrete.
  • Increases chemical and mechanical resistance of mineral building materials.
  • VOC free.


Water tightness – Negative side

Koster NB1 Grey.

Guidance for specification option:

All slabs that could be subjected to hydrostatic pressure from ground water.

  • Mineral coating containing crystallizing and capillary-plugging agents.
  • Excellent resistance to water pressure, abrasion, and chemicals.
  • Highly effective waterproofing material for internal and external applications.
  • VOC free.

Vapour barrier

Koster VAP I 2000.

Guidance for specification option:

  • Curing time of approximately 12 hours.
  • Due to its very high interlacing density, KÖSTER VAP I 2000 is able to reduce the passage of water vapor to such an extent that synthetic resin coatings, adhesives and plastic coverings are not pushed off the substrate. The material displays a good resistance to water, sewage, mineral oils, salt solutions, and diluted acids.
  • µ value of 144 960.
  • SD value 65.2 m (at 500 g/m2).
  • VOC free.
  • One coat application.

Intermediate layer

Koster VAP 06 Primer.

Guidance for specification option:

  • One-component.
  • Fast curing/ drying.
  • Excellent adhesion.
  • Moisture and alkali resistant.
  • VOC free.
  • Water-based/ solvent-free.

Screed

Koster SL Premium.

Guidance for specification option:

  • Self-levelling.
  • Rapid initial strength.
  • Final compressive strength of approximately 45 N/mm2 .
  • Very good adhesion to the substrate.
  • Can also be processed by pump.
  • One-component.
  • VOC free.

Finishing Options

Not required.

Guidance for specification option:

Floor finish supplied by others.

Koster CT 215 Universal Floor - High-build water-based Epoxy.

Koster CT 215 Universal Floor - Self-levelling 2 mm thick.

Koster CT 215 Universal Floor - with highly decorative colour chips finish.

Koster CT 215 Universal Floor - with R11 non-slip finish.

Curing time

Full cure within 28 days of screeding, can be overcoated after 48 hours.

Technical characteristics, other

Koster VAPlite system including Koster NB1 Grey for below ground application against hydrostatic pressure.

Sd value

65.2 m.

Water resistance

Resistant to 130 m head of negative side water pressure.

CompressiveStrength

45 N/mm².

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Recyclability

No

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

Third party certifications

ISO 9001 Quality Management

ISO 9001 Quality Management

Koster Bauchemie AG - ISO 9001 Certificate

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate for Koster NB1 Grey

DoP

Koster CT 215 Product Declaration

EPD

Koster NB1 Grey Environmental Product Declaration

Literature

Koster Moisture Control Systems for Concrete Floors

Koster Moisture Control Systems for Concrete Floors

Koster Floor Coatings

Koster Floor Coatings

Koster Solvent Free Self Leveling Flooring

Koster Solvent Free Self Leveling Flooring

Koster System Advice Sheet - Koster VAPLite System

Koster System Advice Sheet - Koster VAPLite System

Koster Waterproofing Systems Company Brochure

Koster Waterproofing Systems Company Brochure

Koster Waterproofing Systems: The Green Pages of Waterproofing and Construction Chemicals

Koster Waterproofing Systems: The Green Pages of Waterproofing and Construction Chemicals

Case studies

Koster Floor coatings to a domestic garage.

Koster Floor coatings to a domestic garage.

Aintree Racecourse - Koster Flooring Systems to Grandstand

Aintree Racecourse - Koster Flooring Systems to Grandstand

Koster Flooring Systems - Protection to Concrete bund

Koster Flooring Systems - Protection to Concrete bund

Hasbury Methodist Church - Koster Flooring Systems

Hasbury Methodist Church - Koster Flooring Systems

Koster Flooring Systems, 96 Middlesex St. London

Koster Flooring Systems, 96 Middlesex St. London

Schneider Electronics Factory - Koster Flooring Systems

Schneider Electronics Factory - Koster Flooring Systems

Underground Car Park - Koster flooring systems

Underground Car Park - Koster flooring systems

Vapour Control Epoxy flooring to luxury basement in Surrey

Vapour Control Epoxy flooring to luxury basement in Surrey

Similar products from Koster Aquatecnic Ltd

Negative Side Basement Waterproofing using Koster NB1 Grey - Waterproofing System

Negative Side Basement Waterproofing using Koster NB1 Grey - Waterproofing System