PermaRock EPS-Premium EWI System with SiliconeUltra K Finish
Verified by manufacturer 10 months ago
QA Certificate
Certificate type
High-performance, lightweight external wall insulation (EWI) system based on low-lambda, enhanced expanded polystyrene insulation with PermaRock SiliconeUltra K Finish.
Application
Suited for the upgrade of existing buildings and for new buildings, particularly where exemplar levels of thermal performance are required.
Description
High-performance, lightweight external wall insulation (EWI) system based on enhanced expanded polystyrene (EPS) insulation that incorporates microscopic particles of graphite for enhanced thermal performance and to dissipate heat.
PermaRock SiliconeUltra K Finish is a high-performance exterior through-colour textured render based on a hybrid binder system of organically crosslinked nano-quartz particles and silicone emulsion. SiliconeUltra K finish is a lightweight, water-repellent finish with excellent water vapour permeability. PermaRock SiliconeUltra K finish incorporates photo-catalytic particles which actively break down dirt particles enabling them to be washed from the surface under normal weathering. PermaRock SiliconeUltra K-Finish resists aggressive air-borne pollutants and provides enhanced resistance to dirt pick-up. PermaRock SiliconeUltra K Finish contains a preservative against coating deterioration due to algae and fungus.
Features and benefits:
- Lightweight.
- For buildings up to 11 m in height.
- Suitable for all exposure conditions.
- High thermal performance insulation.
- PAS 2035 compliant.
- Insulation thickness 20 - 300 mm.
- PermaRock SiliconeUltra K-Finish is available in a range of over 500 colour shades with the highest binder stability (Class A resistance to chalking) and colour retention (Group 1 light fastness/colour stability).
- Low air permeability. Can assist in improving airtightness.
- Adhesively bonded and mechanically fixed insulation.
- High wind load resistance.
- Thermal conductivity: 0.030 W/m·K.
- BRE Global Certification 158/12.
Design considerations:
- Thermal calculations can be carried out for each project to help to determine the thickness of insulation required to achieve U-value requirements.
Beads/ Trims/ Profiles:
- A full range of beads, trims, sealing tapes, expansion joint tapes and window sealing strips (APU beads) is available to complete the design of the system.
General information
Color | Beige Black Blue Bronze Brown |
Finish | Smooth Textured |
Material | Render Polymer-modified cement Polystyrene Silicone Silicate |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year |
Uniclass | |
CAWS | M21/210 External wall insulation system M21/20 External wall insulation system . . . . . . |
Specification data - External wall insulation systems
Preparation | Not required.PermaRock fungicidal wash.Guidance for specification option: Use to treat walls affected by algae, mould etc. Manufacturer guidanceConsult manufacturer for details of preparation to suit project substrates. |
Insulation | |
Material | Expanded polystyrene (EPS) boards.Guidance for specification option: PermaRock EPS-Premium Insulation (EPS100):
Thickness:
|
Adhesive | PermaRock Adhesive.Guidance for specification option: A polymer-modified cement-based compound for bonding thermal insulation boards to new or existing concrete, masonry substrates as part of PermaRock External Wall Insulation (EWI) systems. PermaRock Lamella Adhesive.Guidance for specification option: A polymer-modified cement-based compound for bonding thermal insulation boards to sheathing boards, CLT, or SIP substrates, as part of PermaRock External Wall Insulation (EWI) systems. |
Additional mechanical fixings | PermaRock Mechanical Fixings.Guidance for specification option: The type, length and number of mechanical fixings (per board or per m²) required is dependent on the exposure (wind load) conditions. In-situ pull-out tests are carried out to determine the pull-out resistance of fixings on a project-by-project basis. Fixings should be used in combination with adhesive bonding of the insulation boards. Consult manufacturer for recommendations. |
Fire barriers and stops | |
Material | Not required.Mineral wool fire-stopping.Manufacturer guidanceRequired horizontally at each floor level commencing at second floor level and at each floor level thereafter. |
Beads and trims | Manufacturer guidanceFull system (EWI) and render-only beads, including verge trims, top trims, starter tracks, full system stop beads, render stop beads, window sealing strips (reveals beads), movement joint beads/ profiles for vertical and horizontal joints. Sealing tapes and expansion joint tapes. All as system manufacturer’s or architect’s details, to be supplied by PermaRock. |
Movement joints | |
Form with | Live construction movement joints.Guidance for specification option: Should be brought through the system. Refer to manufacturer's standard details. |
Render carrier or reinforcement | |
Material | PermaRock Bedding Mortar and PermaRock Reinforcing Mesh.PermaRock Bedding Mortar and PermaRock Armoured Mesh.Guidance for specification option: For areas where high levels impact resistance are required. |
Fixings | PermaRock Reinforcing Mesh patches.Guidance for specification option:
PermaRock Reinforcement Layer Fixings (stainless steel).Guidance for specification option:
|
Render | |
Application | Intermediate coat. |
Material | PermaRock Bedding Mortar and PermaRock K&R Primer. |
Decorative finish | PermaRock SiliconeULTRA K Finish.Guidance for specification option: K Finish: 1.0 mm, 1.5 mm, 2.0 mm and 3.0 mm grain size top coats available. Insert requirements. |
Colour | Manufacturer guidanceAvailable in an extensive range of colours from the PermaRock A1 Colour Range. Darker colours (Lightness Factor <20) are unsuitable for use with EPS / Phenolic insulation systems. Insert requirements. |
Protective coating | None.PermaRock Silicone ULTRA facade coating.Guidance for specification option: Self-cleaning facade paint with nano-quartz matrix structure. For use with K-Finish/ R-Finish renders with lightness factor < 20. |
System completion | Manufacturer guidance
|
Substrate | Cross laminated timber (CLT). Existing brickwork/ blockwork/ concrete. New brickwork/ blockwork/ concrete. SFS (Steel frame with sheathing board). Structural insulated panels (SIPS). |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Recyclability | Insulation can be recycled at end of life. |
Third party certifications
QA Certificate
BRE: Global Certification 158/12
Similar products from PermaRock Products Ltd
PermaRock EPS-Premium EWI System with Brick Slip Finish -
PermaRock EPS-Premium EWI System with Dry Dash
PermaRock EPS-Premium External Wall Insulation System with Brick-effect Render Finish
PermaRock Mineral Fibre EWI System with Brick Slip Finish - Class A External Wall Insulation System
PermaRock Mineral Fibre EWI System with Brick-effect Render
PermaRock Mineral Fibre EWI System with Dry Dash
PermaRock Mineral Fibre EWI System with SiliconeUltra K Finish