Skyway Flatglass Rooflight With Secondary Blinds Below Glass - Fixed And Opening

An aesthetically-pleasing and effective daylighting solution. Fixed or opening flat glass rooflight with secondary blinds below the glass.

Features and benefits:

• Fully thermally broken aluminium frame prevents cold bridging and reduces condensation.
• Excellent thermal performance, with total system U-values as low as 0.6 W/m²K achievable.
• Quick and easy to install on-site.
• Compatible with both flat and pitched roofs.
• White blind fabric with a white frame as standard.
• Various colour blind fabrics available in white frame.
• Blind frame can be ordered already connected to the rooflight or loose for install below the rooflight in the lightwell.
• Blinds are classed as black out.
• Building Regulations (E&W) Approved Document L compliant design to achieve low U-value targets.
• Marine grade powder coat as standard
• Silicone jointed glazing for a flush outer surface.
• Ventilation option for natural ventilation in accordance with Building Regulation (E&W) Approved Document F, available with a glazed in vent.
• Designed to be installed to a weathered builders kerb, minimum 5° pitch.
• Non-Fragile to Centre for Window and Cladding Technology (CWCT) Class 1 and 2 to TN66/67 and TN92.
• Double or triple glazed integrated glazing units (IGUs) can be contained within a single frame to cater for a wide range of sizes.
• Heat soak testing (HST) of all toughened glass to help reduce defect failures.
• All laminated glass with polished edges to help negate defect failures.
• All glass features Low Emissivity (low e) coating for enhanced thermal performance.
• More daylight leads to enhanced well-being.
• 15-year warranty (blind unit covered by three-year warranty).
• Fully bespoke sizes to suit any application.
• Sleek, 24 V Wi-Fi transformer wall switch.

Designed to standard loadings of 640 N/m² (snow) and 750 N/m² (wind) and in accordance with the following Standards:

• BS 6375-1 2015+A1 2016: Weather tightness.
• BS EN 1026: Air permeability.
• BS EN 1027: Water tightness test.
• BS EN 12211: Wind resistance test.
• BS 1474: Aluminium Extrusions.
• EN 12020-1:2001: Aluminium Extrusions.
• BS EN ISO 16396-2:2017: Polyamide Thermal Break.
• BS EN 12206-1:2004: Powder Coating.
• EN ISO 10456: 2008 and EN 12664: 2001: Building materials and products. Hygrothermal properties.
• BS EN 1279: Insulated Glass Units (IGU).
• EN 14179: Heat Soak Testing Toughened Glass.
• ISO 11600-FandG-25LM: Silicone Sealants.